guru
04-15-03, 08:32 AM
I've installed the new drivers on a brand new pc with a new GF4 card.
OS: Debian/Gnu Linux 3.0 (Woody)
Kernel: 2.4.20
XFree: 4.1.0.1
CPU: AMD Athlon XP 2400+
Motherboard: ASUS-V8X7N / KT400 chipset
RAM: 1 x 512MB Kingston PC2700 DDR-333
GF Card: inno3d GeForce 4 ti4200
Installation runs smoothly, and it compiles and install the nvidia.o kernel module without errors.
When I fire up X, it goes thru the steps/detections (See included output), and then try to switch to graphic mode, but instead I get a text-based mode filled with small color patches and random letters (a bit like piping a memory dump into an ANSI terminal back when that was fun :-)
The system then hangs without visible activity. Process viewers do though reveal a loadavg between 1.5 and 2 with no disk activity!
If I try to kill the process, the system just hangs, no matter what kind of kill I try (or even shutdown).
Commands that loads a new command shell, initialises, but never starts (like vi).
Since im tired of running e2fsck on a 80GB harddrive everytime I try something new to solve this, I was hoping you might have a pointer to where to look for the solution.
j-
==== "X" OUTPUT ====
# X
warning: process set to nice value 0 instead of -10 as requested
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)
XFree86 Version 4.1.0.1 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 21 December 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.17 i686 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Tue Apr 15 14:25:46 2003
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "AGP"
(**) |-->Screen "NV Screen" (0)
(**) | |-->Monitor "Monitor"
(**) | |-->Device "NV AGP"
(**) |-->Input Device "Generic Keyboard"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc104"
(**) XKB: layout: "dk"
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "Generic Mouse"
(**) FontPath set to "unix/:7110,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/TrueType,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(--) PCI:*(1:0:0) NVidia unknown chipset (0x0281) rev 161, Mem @ 0xf2000000/24, 0xf4000000/26, BIOS @ 0xf3fe0000/17
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.4349
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.1.9
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.4349
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) NVIDIA XFree86 Driver 1.0-4349 Thu Mar 27 19:02:58 PST 2003
(II) NVIDIA Unified Driver for all NVIDIA GPUs
(--) Chipset NVIDIA GPU found
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(--) NVIDIA(0): Linear framebuffer at 0xF4000000
(--) NVIDIA(0): MMIO registers at 0xF2000000
(II) NVIDIA(0): NVIDIA GPU detected as: GeForce4 Ti 4200 with AGP8X
(--) NVIDIA(0): VideoRAM: 65536 kBytes
(II) NVIDIA(0): Connected display device(s): CRT-1
(--) NVIDIA(0): Detected TV Encoder: Brooktree 871
(--) NVIDIA(0): Display device CRT-1: maximum pixel clock at 8 bpp: 350 MHz
(--) NVIDIA(0): Display device CRT-1: maximum pixel clock at 16 bpp: 350 MHz
(--) NVIDIA(0): Display device CRT-1: maximum pixel clock at 32 bpp: 350 MHz
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(WW) NVIDIA(0): Failure reading EDID parameters for display device CRT-1
(II) NVIDIA(0): Monitor: Using hsync range of 30.00-90.00 kHz
(II) NVIDIA(0): Monitor: Using vrefresh range of 50.00-160.00 Hz
(II) NVIDIA(0): Clock range: 12.00 to 350.00 MHz
(II) NVIDIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1280x1024" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1792x1344" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1856x1392" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(**) NVIDIA(0): Validated modes for display device CRT-1:
(**) NVIDIA(0): Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
(**) NVIDIA(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(**) NVIDIA(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(**) NVIDIA(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(==) NVIDIA(0): DPI set to (75, 75)
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
(--) Depth 24 pixmap format is 32 bpp
(II) NVIDIA(0): AGP 8X successfully initialized
(II) NVIDIA(0): Setting mode "1280x1024"
==== /etc/X11/XF86Config-4 ====
$ cat /etc/X11/XF86Config-4
# XF86Config-4 (XFree86 server configuration file) generated by Dexconf, the
# Debian X Configuration tool, using values from the debconf database.
#
# Edit this file with caution, and see the XF86Config manual page.
# (Type "man XF86Config" at the shell prompt.)
Section "Files"
FontPath "unix/:7110" # local ttf font server
# FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/TrueType"
#FontPath "/usr/lib/X11/fonts/cyrillic"
#FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
#FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection
Section "ServerFlags"
EndSection
Section "Module"
# Load "xtt"
# Load "ddc"
# Load "GLcore"
Load "dbe"
# Load "dri"
Load "extmod"
Load "glx"
# Load "pex5"
# Load "record"
# Load "xie"
# Load "bitmap"
Load "freetype"
# Load "speedo"
Load "type1"
# Load "vbe"
# Load "int10"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "dk"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/psaux"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "false"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Generic Mouse"
Driver "mouse"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "false"
Option "ZAxisMapping" "4 5"
EndSection
###Section "Device"
### Identifier "Generic Video Card"
#### Driver "nv"
#### Driver "nvidia"
### Driver "vesa"
###EndSection
Section "Device"
Identifier "NV AGP"
VendorName "nvidia"
Driver "nvidia"
# update this with the PCI id of your card. Consult the output
# of the 'lspci' command.
BusID "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "Monitor"
HorizSync 30-90
VertRefresh 50-160
Option "DPMS"
EndSection
#
# screen section for an nvidia AGP card
#
Section "Screen"
Identifier "NV Screen"
Device "NV AGP"
Monitor "Monitor"
DefaultColorDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x400"
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubsection
EndSection
Section "DRI"
Mode 0666
EndSection
# end of XF86Config
OS: Debian/Gnu Linux 3.0 (Woody)
Kernel: 2.4.20
XFree: 4.1.0.1
CPU: AMD Athlon XP 2400+
Motherboard: ASUS-V8X7N / KT400 chipset
RAM: 1 x 512MB Kingston PC2700 DDR-333
GF Card: inno3d GeForce 4 ti4200
Installation runs smoothly, and it compiles and install the nvidia.o kernel module without errors.
When I fire up X, it goes thru the steps/detections (See included output), and then try to switch to graphic mode, but instead I get a text-based mode filled with small color patches and random letters (a bit like piping a memory dump into an ANSI terminal back when that was fun :-)
The system then hangs without visible activity. Process viewers do though reveal a loadavg between 1.5 and 2 with no disk activity!
If I try to kill the process, the system just hangs, no matter what kind of kill I try (or even shutdown).
Commands that loads a new command shell, initialises, but never starts (like vi).
Since im tired of running e2fsck on a 80GB harddrive everytime I try something new to solve this, I was hoping you might have a pointer to where to look for the solution.
j-
==== "X" OUTPUT ====
# X
warning: process set to nice value 0 instead of -10 as requested
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)
XFree86 Version 4.1.0.1 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 21 December 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.17 i686 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Tue Apr 15 14:25:46 2003
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "AGP"
(**) |-->Screen "NV Screen" (0)
(**) | |-->Monitor "Monitor"
(**) | |-->Device "NV AGP"
(**) |-->Input Device "Generic Keyboard"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc104"
(**) XKB: layout: "dk"
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "Generic Mouse"
(**) FontPath set to "unix/:7110,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/TrueType,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(--) PCI:*(1:0:0) NVidia unknown chipset (0x0281) rev 161, Mem @ 0xf2000000/24, 0xf4000000/26, BIOS @ 0xf3fe0000/17
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.4349
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.1.9
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.4349
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) NVIDIA XFree86 Driver 1.0-4349 Thu Mar 27 19:02:58 PST 2003
(II) NVIDIA Unified Driver for all NVIDIA GPUs
(--) Chipset NVIDIA GPU found
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(--) NVIDIA(0): Linear framebuffer at 0xF4000000
(--) NVIDIA(0): MMIO registers at 0xF2000000
(II) NVIDIA(0): NVIDIA GPU detected as: GeForce4 Ti 4200 with AGP8X
(--) NVIDIA(0): VideoRAM: 65536 kBytes
(II) NVIDIA(0): Connected display device(s): CRT-1
(--) NVIDIA(0): Detected TV Encoder: Brooktree 871
(--) NVIDIA(0): Display device CRT-1: maximum pixel clock at 8 bpp: 350 MHz
(--) NVIDIA(0): Display device CRT-1: maximum pixel clock at 16 bpp: 350 MHz
(--) NVIDIA(0): Display device CRT-1: maximum pixel clock at 32 bpp: 350 MHz
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(WW) NVIDIA(0): Failure reading EDID parameters for display device CRT-1
(II) NVIDIA(0): Monitor: Using hsync range of 30.00-90.00 kHz
(II) NVIDIA(0): Monitor: Using vrefresh range of 50.00-160.00 Hz
(II) NVIDIA(0): Clock range: 12.00 to 350.00 MHz
(II) NVIDIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1280x1024" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1792x1344" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1856x1392" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(**) NVIDIA(0): Validated modes for display device CRT-1:
(**) NVIDIA(0): Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
(**) NVIDIA(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(**) NVIDIA(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(**) NVIDIA(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(==) NVIDIA(0): DPI set to (75, 75)
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
(--) Depth 24 pixmap format is 32 bpp
(II) NVIDIA(0): AGP 8X successfully initialized
(II) NVIDIA(0): Setting mode "1280x1024"
==== /etc/X11/XF86Config-4 ====
$ cat /etc/X11/XF86Config-4
# XF86Config-4 (XFree86 server configuration file) generated by Dexconf, the
# Debian X Configuration tool, using values from the debconf database.
#
# Edit this file with caution, and see the XF86Config manual page.
# (Type "man XF86Config" at the shell prompt.)
Section "Files"
FontPath "unix/:7110" # local ttf font server
# FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/TrueType"
#FontPath "/usr/lib/X11/fonts/cyrillic"
#FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
#FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection
Section "ServerFlags"
EndSection
Section "Module"
# Load "xtt"
# Load "ddc"
# Load "GLcore"
Load "dbe"
# Load "dri"
Load "extmod"
Load "glx"
# Load "pex5"
# Load "record"
# Load "xie"
# Load "bitmap"
Load "freetype"
# Load "speedo"
Load "type1"
# Load "vbe"
# Load "int10"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "dk"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/psaux"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "false"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Generic Mouse"
Driver "mouse"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "false"
Option "ZAxisMapping" "4 5"
EndSection
###Section "Device"
### Identifier "Generic Video Card"
#### Driver "nv"
#### Driver "nvidia"
### Driver "vesa"
###EndSection
Section "Device"
Identifier "NV AGP"
VendorName "nvidia"
Driver "nvidia"
# update this with the PCI id of your card. Consult the output
# of the 'lspci' command.
BusID "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "Monitor"
HorizSync 30-90
VertRefresh 50-160
Option "DPMS"
EndSection
#
# screen section for an nvidia AGP card
#
Section "Screen"
Identifier "NV Screen"
Device "NV AGP"
Monitor "Monitor"
DefaultColorDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x400"
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubsection
EndSection
Section "DRI"
Mode 0666
EndSection
# end of XF86Config