Need help with kt400 Problem

[RedEYE]

Hi Andy,

I've got a Gigabyte 7VAX (KT400), a 1900 xp 512 mb drr and a MSI gef0rce 4 ti 4200 vtd64 (!!!which is AGP 4X!!!) with Suse 8.2. If i install the driver, change nv to nvidia and reboot the system, instead of the Login Screen the monitor comes black. I looked through my xf86 logfile but as you can see, it is loaded correctly. I don't know why this Error occurs because it's not an AGP 8x graphic card. I attached the xf86 log. Could you please help me. Step by Step please, im a linux Newbie.

[Andy Mecham]

I attached the xf86 log.Looks like it didn't make it.

What driver are you using?

--andy

[alien999999999]

it appears that we have a similar problem.

I have a KT400 and a 2200 XP with GeForce2MX400 (AGP 4x).

what I wanted to know is: do you have the KT400 mobo with the onboard lan? and what distro are you using...

to get the log file here, you have to rename it with a txt extension, you should probably include the config file as well...

[Andy Mecham]

to get the log file here, you have to rename it with a txt extensionNot anymore - the forums now support .log files.

--andy

[RedEYE]

sorry, here it should be

[alien999999999]

well the log says you are using the NV driver, are you sure that's the correct log?

according to the messages, your eth0 is wrongly configured.

please give us the correct /var/log/XFree86.0.log logfile and /etc/X11/XF86Config-4 file

if you did use the NVIDIA module and are sure of it, try using
Option "NvAGP" "1" in the config file

[RedEYE]

Sorry again, I thougt is was the rigth one because i sent it to a friend. I 'll try Option "NvAGP" "1". But i think i already tried it. I'm sure i tried mode 0 and 3 - Without any success. At the moment i'm under winxp so i'll upload the files later.