PDA

View Full Version : Vdroop question


Mr_LoL
07-02-08, 05:09 PM
I set my cpu voltage as 1.45 in the bios but cpuz reports it as 1.392. I take it this is vdroop? Also is cpuz accurate in reporting voltages?

mullet
07-02-08, 11:53 PM
Yes its vdroop, make sure Lineload Calibration in bios is enabled and see how you do then.

Amuro
07-03-08, 02:00 AM
No, that is not Vdroop. It is the Vdrop or Voffset, the differnece between BIOS set vcore and actual voltage. Vdroop is the difference between idle and load voltage.

Mr_LoL
07-03-08, 09:29 PM
No, that is not Vdroop. It is the Vdrop or Voffset, the differnece between BIOS set vcore and actual voltage. Vdroop is the difference between idle and load voltage.

Thanks. COnfused still so i'll google it. :D
Actually idle is 1.43
Load is 1.41. Take it this is vdroop.
Cheers.