PDA

View Full Version : I need a way to attach 16 touch panel to single MB


vitaly_v_ch
02-12-09, 03:25 AM
Have nvidia any solution for this task?

also I need a way for software to identify each LCD display (workplace) by connection slot.

It will be embedded solution in quantity about few thousands.

\\wbr Vitaly Chernookiy.

a12ctic
02-12-09, 11:05 AM
E-Sata obviously.

ViN86
02-12-09, 11:36 AM
you mean connect 16 individual touch panel screens?

if that's the case, id use either ethernet or USB. you could use hubs to create 16 individual connections.

vitaly_v_ch
02-12-09, 12:10 PM
you mean connect 16 individual touch panel screens?

if that's the case, id use either ethernet or USB. you could use hubs to create 16 individual connections.

Yes, I mean

XDanger
02-13-09, 10:17 PM
16x (lets say)15" touch screens + PC x "quantity about few thousands" ?????????



The guy in charge of a $15,000000 project is asking nvews posters for advise on setup?

I'd fire you now before you mess it up.


Just kidding.

But seriously ,Surely theres a standard in your field of work and you should know it.

What do other similar systems use?

vitaly_v_ch
02-16-09, 07:45 AM
But seriously ,Surely theres a standard in your field of work and you should know it.

What do other similar systems use?

In our area usually are used network of 16 PC which share access to they LCD with touchpanel via ethernet. Someone use USB-attached LCD and touchpanel.

But I try to found some more optimal solution. 16 PC for forwarding only is overhead. USB - to slow.

At now I think about 8 dual-head graphics card via pcie expander for LCD and usb for touch-panel.