PDA

View Full Version : LED Project work log


TheBigOne
08-02-09, 01:41 AM
I decided to add some LED'S to my main rig, going to use RGB LED'S And going to remote control them to change color and use a second relay to switch on music mode and few or other modes and always on mode.

Cut a couple of holes and added a couple of lighted switchs and sensitivity control

http://i268.photobucket.com/albums/jj33/djrivera680/DSC_0108.jpg

Ran power to switchs to RF 4/ch control unit which is going to be use to control color of the led and second relay for both led controller and first led control and installed in case, will etch
circuit board on sunday for second led controller and solder all component on board.

http://i268.photobucket.com/albums/jj33/djrivera680/DSC_0109.jpg

Picture of 4/ch remote unit I am using

http://i268.photobucket.com/albums/jj33/djrivera680/DSC_0110.jpg

Mess of wire that going to wire all led with resistor 470 -560ohms

http://i268.photobucket.com/albums/jj33/djrivera680/DSC_0111.jpg

Mr Bigman
08-02-09, 01:50 AM
Those are the same wire kits i used to use back in the day when doing bench projects.

I like the remote control box too.

Where did you get the sleeves for the wire to cover the solder spots?

TheBigOne
08-02-09, 04:00 PM
Installed Controller solder most of the wiring already one controlled is under PSU
picture is of wiring

http://i268.photobucket.com/albums/jj33/djrivera680/DSC_0112.jpg

http://i268.photobucket.com/albums/jj33/djrivera680/DSC_0113.jpg

Cn change color by remote control to blue to red to UV, also made custom controller for flashing and other modes and one for music

http://i268.photobucket.com/albums/jj33/djrivera680/DSC_0114.jpg

http://i268.photobucket.com/albums/jj33/djrivera680/DSC_0115.jpg

TheBigOne
08-02-09, 04:40 PM
Here finsh pics

http://i268.photobucket.com/albums/jj33/djrivera680/DSC_0116.jpg

http://i268.photobucket.com/albums/jj33/djrivera680/DSC_0117.jpg

http://i268.photobucket.com/albums/jj33/djrivera680/DSC_0118.jpg

http://i268.photobucket.com/albums/jj33/djrivera680/DSC_0119.jpg

Mr Bigman
08-02-09, 05:05 PM
Nice wiring setup.

My soldering skills aren't what they used to be i would venture to say is if i got back into doing this stuff than i would regain those abilities again.

I went to DeVry for 3 years before and after i served and got the skills but ofcourse i was doing stuff as a kid so i learned alot but forgot alot.

I have forget more than most people learn in a lifetime but im still smarter than most.

bob saget
08-02-09, 05:28 PM
Nice wiring setup.

My soldering skills aren't what they used to be i would venture to say is if i got back into doing this stuff than i would regain those abilities again.

I went to DeVry for 3 years before and after i served and got the skills but ofcourse i was doing stuff as a kid so i learned alot but forgot alot.

I have forget more than most people learn in a lifetime but im still smarter than most.

Why do you feel you need to remind us. We will never forget that.

TheBigOne
08-02-09, 06:31 PM
This is everything put back together

http://i268.photobucket.com/albums/jj33/djrivera680/DSC_0120.jpg

http://i268.photobucket.com/albums/jj33/djrivera680/DSC_0121.jpg

Mr Bigman
08-02-09, 07:28 PM
Why do you feel you need to remind us. We will never forget that.

Why does God always remind us of his powers tato?

Cuz he can.

I am about as close to God as any can get Im very ****able and so damn sexy it aint funny.

Very nice job Big.

The Steak man is next shaw.