PDA

View Full Version : which gfx card...?


Domy
08-21-03, 11:36 AM
err...i actually already posted some times ago but that is to picks up an ati card on my system.well, my question is...which perform best for my system:Fx5200/ultra,fx 5600 or ti 4200.thx guys...

p3 866@1080
gf3ti200
256 spectec
abit vh6-II

jAkUp
08-21-03, 11:39 AM
well whatever you get your gonna be limited by your cpu and memory... so i would recommend to just get the cheapest.. the 4200 will be fine.

ragejg
08-21-03, 12:15 PM
...unless you're getting a vidcard that's gonna sit in your P3 for a little while, then migrate to your next mobo...

If you're doing that, then I'd recommend the 5600... but just make sure you find one with fast memory...

stncttr908
08-21-03, 12:34 PM
Originally posted by ragejg
...unless you're getting a vidcard that's gonna sit in your P3 for a little while, then migrate to your next mobo...

If you're doing that, then I'd recommend the 5600... but just make sure you find one with fast memory... An excellent point, although it might still be more cost effective to get a ti4200. Get a 128MB model if you do go that route. It will easily clock up to the 64MB speeds (250/500) without any problems.

SH64
08-21-03, 04:32 PM
my vote goes to the 4200 ... it will work great in your system .
only take the 5600 if your planning to get a P4 CPU so combining them can give some good perormance .

IISquintsII
08-21-03, 06:00 PM
Uh.....I say you should forget about getting a 3d card and upgrade your system.