PDA

View Full Version : Possible to diable flicker fix in newer rels?


Malichite
12-24-03, 11:59 PM
Since I am not affected by the flicker problem, I was wondering if it is possible to disable the flicker fix in newer driver releases? Supposedly the beta Detonator drivers 51.75 didn't have the flicker fix, thus the temperature was back at the normal pre-flicker fix levels (Ambient 34C, Idle 39C). Like I said above, since I am not affected by the flicker issue I would rather have my card operate approximately 10C cooler (53.03 read Ambient 39C, Idle 49C). Yes I am aware that the higher temp caused by the "fixed" drivers is still well within tolerances, but typically most things run more stable at cooler temps.

Doubt it is easily modified, but thought I would see if anyone had found a solution to the higher temperature issue.

-Mali

The Baron
12-25-03, 12:19 AM
Nope. No way to, as far as I know. Definitely going to be some odd setting hardwired in a core DLL; no registry hack is going to change that.