PDA

View Full Version : Asus P4P800 + P4 2.8B = ??


w00kiec00kie
03-01-04, 03:13 PM
I have the Asus P4P800 and the P4 2.8 @ 533 (running at 156x4 FSB)
with a Antec Truepower 430W,
FX5200 (soon to be upgraded to SOMETHING!)
Audigy Ex
2x 256 GeiL Platinum 3500


Somehow, when I set some Vcore in bios settings, whenever any program reads the Vcore, it's 0.1 higher every time. (All other voltages show up around the right numbers) Does anyone have such an experience with this mobo?

I was also wondering which AGP/PCI option would give me 'locked' AGP/PCI frequency. I have (AUTO, 66/33 , something else..)

Also, the DRAM speed settings are NOT done by the ratio (1:1, 5:4, etc) Is this correct? When I set the DRAM to 333 (166 ddr) The CPU-Z shows me the right number as if the ratio was 4:5 FSB:RAM. (156:195)
(the DRAM settings I have are 266 / 333 - just like I can only get 1:1 / 4:5 for a CPU with 533FSB)

Thanks ahead for the replies.

Dazz
03-01-04, 03:44 PM
The chances are it will over volts to increase stabilty 0.1 is nothing to worry about what so ever.