how to swap audio channels ?

[stylo]

hi all,

i need to swap left and right audio channels on my NF7-S rev2.0 and i have'nt found any utility to do this. NVMIXER can't, NVSWAP jsut let me ear white noise on each speaker but can't swap anything :D

little help needed please !

thx a lot.

[stncttr908]

Why do you need the do this? I know that with my Logitech Z-640's when I used my onboard audio had to have the orange and black plugs switched.

[stylo]

i 've got Yamaha 2.1, wire connection from right speaker to subwoofer have to be at left hand for wiring convenience, so i swapped the speakers.

any idee ?

[stylo]

up

[saturnotaku]

Don't bump 4 hours after you post. :nono:

Bad forum ettiquite.

[stylo]

so how long should i wait ?? 8h00 ? 12h00 ? or maybe 1 day ? :)

[Rogozhin]

get yourself a real amp and speakers, then you can wire them however you want after running the line out to an rca double into your pre/pro-receiver.

You can then control everything. Sell that other junk on ebay.

or if you have a decent soundcard you can run the toslink or coaxial digital out to a digital in on a receiver and then wire it backwards.

and don't mind saturn.


Rogo

[stylo]

i thought there was a trick i could do with the audio drivers, but i m affraid there 's not.
btw, i can wire a female/male 3.5mm jack with left and right channels swapped.

thx a lot.

[DaveW]

Can't you just move the left speaker to the right side of you monitor, and the right speaker to the left side of your monitor?

[stylo]

that's right, can only move right one to the left of the monitor, not to the right, wire isn't long enough...

[DaveW]

that's right, can only move right one to the left of the monitor, not to the right, wire isn't long enough...

Move you case, or get an a simple extension cord to the wire thats not long enough, they are easy to find.

[UDawg]

Don't bump 4 hours after you post. :nono:

Bad forum ettiquite.


So is telling some one what is bad ettiquite and not contributing to the topic. :lol2: