PDA

View Full Version : DVI output on PCI GeForce 2 MX 400


yagomike
07-15-04, 11:30 PM
My PC has two graphics cards. A Geforce3 Ti 200 in the AGP slot and a
GeForce2 MX 400 in a PCI slot. Both cards have DVI outputs. Under Windows 2000 using 5.6.7.2 drivers, I cannot get the DVI port on the GeForce2 card to do anything. The GeForce3 DVI output works fine, and the analog output on the GeForce2 works. Is there some way to force the card to use the DVI output?

I am able to use the DVI output of both cards on the same setup running Linux, so I know that the hardware works.

I've tried swapping which monitor plugs into which card. No help.

Any help would be appreciated.

-- Mike

ricercar
07-17-04, 01:01 PM
When you open the advanced panel on the GF2, so you have any TwinView options?

yagomike
07-17-04, 11:14 PM
When you open the advanced panel on the GF2, so you have any TwinView options?

Well, now I feel like an idiot. It was actually under something called "nview display mode." I thought I'd pushed every button there was to push.

Thanks,

-- Mike