1.0-6113 for FreeBSD thread

[andras]

I'm using FreeBSD 5.3.
The driver 1.0-6113 + xorg 6.8.0 (or 6.7.0) was working fine.
After portupgrade, i have xorg 6.8.1 and problem with system hang-up when i try enemy-territory or doom3; glxgears runs with 600F/S. I recompiled kernel without agp and using : Option "NvAGP" "1".

It was my mistake ;-) i had to reinstall /usr/ports/x11/nvidia-driver (i've made portupgrade while x11 was running) , now everything works like before..

[m87carlson]

I know its typical to post problems in a forum, but I for one have always had pretty good sucess with the FreeBSD Drivers. Currently I use a Dell Percision 670 running FreeBSD 5.3

So far I everything works great with the Geforce Quadro1300FX PCI-e 16x card. I can even run the doom3 demo with acceptable framerates.

I just wanted to post an encouraging word on the Drivers for others. I've used almost everything from a tnt2 to a Quardo with both Drivers rev's and the FreeBSD 5.x branch. Please keep up the good work

[jmann]

I'm running FreeBSD 5.3-RELEASE.

I have attempted the build the driver without Linux ABI compatibility, by editting src/nv-freebsd.h and changing:

#define NV_SUPPORT_LINUX_COMPAT

to

#undef NV_SUPPORT_LINUX_COMPAT

However, the driver build script still wants to install files into /compat/linux/ subdirectories, and when the module is loaded, it still preloads linux.ko.

Why is this?

[darius]

Thanks Harvey, that stopped the message and actually stopped another which said "stray irq 7".

However I can't make my desktop computer's card work, I'll try the various solutions floating around here..
"stray irq 7" is from your parallel port - just ignore it.

[darius]

I'm getting a panic with 6.0-CURRENT, the 6113 drivers and a Dell Inspiron 8600 with an Fx5200 Go..



# startx
xauth: (argv):1: bad display name ":0" in "list" command
xauth: (stdin):1: bad display name ":0" in "add" command
xauth: (argv):1: bad display name ":0" in "list" command
xauth: (stdin):1: bad display name ":0" in "add" command


X Window System Version 6.8.1
Release Date: 17 September 2004
X Protocol Version 11, Revision 0, Release 6.8.1
Build Operating System: FreeBSD 6.0 i386 [ELF]
Current Operating System: FreeBSD 6.0-CURRENT FreeBSD 6.0-CURRENT #0: Sun Feb 1
3 21:23:24 CST 2005 darius@inchoate.localdomain:/usr/obj/usr/src/sys/INCHOAT
E i386
Build Date: 02 December 2004
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb 20 17:05:45 2005
(==) Using config file: "/usr/X11R6/lib/X11/xorg.conf"

(EE) Failed to load module "speedo" (module does not exist, 0)

NVRM: detected agp.ko, aborting NVIDIA AGP setup!



Fatal trap 12: page fault while in kernel mode
fault virtual address = 0xbfc00000
fault code = supervisor write, page not present
instruction pointer = 0x8:0xc05ac6e5
stack pointer = 0x10:0xd558c9c0
frame pointer = 0x10:0xd558c9cc
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 3
current process = 106 (Xorg)
[thread pid 106 tid 100043 ]
Stopped at pmap_unmapdev+0x4d: movl $0,PTmap(,%eax,4)
db>
db> bt
No such command
db> tr
Tracing pid 106 tid 100043 td 0xc1e34450
pmap_unmapdev(98,1000,d558c9fc,c07fc8a2,98) at pmap_unmapdev+0x4d
os_unmap_kernel_space(98,1000,d558c9fc,c07fc894,2) at os_unmap_kernel_space+0xe
_nv001148rm(c1e10c00,98,1000,c209a200,0) at _nv001148rm+0x1e
_nv000938rm(c2230000,3,0,c2230000,a) at _nv000938rm+0x29c
_nv001635rm(c21d9000,11,10,74,c1d00021) at _nv001635rm+0x137
_nv001545rm(c21d9000,4,0,c07fcb42,c1e10c00) at _nv001545rm+0x62
_nv006175rm(c1e60a00,c1d7dd00,0,d558caf0,c0801ccb) at _nv006175rm+0x9b
rm_shutdown_adapter(c1e60a00,c1e60a00,c1e60b00,c1e 60a00,d558cb34) at rm_shutdown
_adapter+0x51
nvidia_close_dev(c1e60b00,c1e60900,c1e34450,c1e60a 00,c1e01280) at nvidia_close_d
ev+0x4e
nvidia_dev_close(c1e60900,3,2000,c1e34450,c1e60900 ) at nvidia_dev_close+0x30
devfs_close(d558cb78) at devfs_close+0x24e
VOP_CLOSE_APV(c0605700,d558cb78) at VOP_CLOSE_APV+0x38
vn_close(c220d564,3,c1d7cd80,c1e34450,c1d7dd00) at vn_close+0x40
vn_closefile(c2174678,c1e34450,d558cc2c,c0491b08,c 2174678) at vn_closefile+0xd6
devfs_close_f(c2174678,c1e34450) at devfs_close_f+0xf
fdrop_locked(c2174678,c1e34450,c1d68688,0,c05de717 ) at fdrop_locked+0x70
fdrop(c2174678,c1e34450,c0571ed4,c14453c0,c1437330 ) at fdrop+0x24
closef(c2174678,c1e34450,0,c1e34450,7) at closef+0x33b
close(c1e34450,d558cd14,1,9a,3282) at close+0x17d
syscall(2f,2f,2f,0,836e000) at syscall+0x213
Xint0x80_syscall() at Xint0x80_syscall+0x1f
--- syscall (6, FreeBSD ELF32, close), eip = 0x2823e933, esp = 0xbfbfeb4c, ebp = 0xbfbfeb68 ---
db> show reg
cs 0x8
ds 0xc04a0010 linker_lookup_file+0x1c4
es 0xd5580010
fs 0xc20b0018
ss 0x10
eax 0
ecx 0x2000
edx 0
ebx 0x2000
esp 0xd558c9c0
ebp 0xd558c9cc
esi 0
edi 0x98
eip 0xc05ac6e5 pmap_unmapdev+0x4d
efl 0x13246
dr0 0
dr1 0
dr2 0
dr3 0
dr4 0xffff0ff0
dr5 0x400
dr6 0xffff0ff0
dr7 0x400

[muythaibxr]

I sure hope nVidia releases a new driver soon, since they haven't released one since Aug.... I STILL don't have AGP support on my K8T800 chipset... it's planned for the next release.... :(

[lanjoe9]

I hope my laptop's TV-OUT works again.... and my desktop's CRT-OUT works again as well!