PDA

View Full Version : Leadtek A400 and fan controller?


Bilux
09-22-04, 01:17 PM
A have a problem.
My Leadtek A400 6800nu fan rotate max rpm when pc boot.
When windows loading fan rotate min rpm quiet mode.
My problem the fan not rotate max rpm when load 3D application.
Is these good?
Thanks the answers.
Sorry the bad english, im from Hungary and little bit speak english. :lame:

ATI_Dude
09-22-04, 01:48 PM
My card does the same thing.

Bilux
09-22-04, 01:52 PM
My card does the same thing.

Well then driver problem?
Because old Fx MSI5900 is good.
3D application start fan rotate max rpm when exit low rpm.

Gummz
09-22-04, 02:20 PM
I don't own any GF-FX+ cards, but from I've read, the fan spins up at full speed when booting up initially (or reboot I'm assuming) and then once the drivers are loaded, then it goes into 2D mode, thus lowering the RPMs of the fan... the card doesn't know initially so it blasts it at full speed and then the drivers will put it into 2D mode... I hope that's right :)

OWA
09-22-04, 02:57 PM
Yeah, this is normal for the 6800s. They don't spin up to max when running 3D games like the Fx series did. My eVGA 6800 GT and PNY 6800 Ultra both act the same way.

Bilux
09-22-04, 03:59 PM
THX everybody!
If, this is normal then i be at ease.
;)