PDA

View Full Version : Double Check my methods PLZ


nVidiaGuru
04-25-05, 04:26 AM
I decided to bust out the multimeter and see what my 12v rail did under load.

My hardware doctor (software) is reading it 11.64 with dips to 11.58

when i tested with the multimeter i got 11.99 and it did not budge once

i put the red lead on the multimeter on the yellow wire on the molex and the black wire to a ground, and had the multimeter set to read 20v dcv. AFAIK this is the correct way, but I didnt expect my rail to be that stable, but it is a 550w antec :)