PDA

View Full Version : Noob question about SLI


Seph gPu
06-24-05, 04:55 PM
Hi,

Just registered here. I have a pci-e motherboard but not a SLI motherboard. I saw there are new cards that are sli on one card basically one card with two cores I was wondering if you needed an sli motherboard to run one card with dual cores or if one normal pci-e slot would do? Thank you. ( I asked this here because I'm looking into 2 6800 gt's, 7800's are too expensive )

SLippe
06-24-05, 06:39 PM
This should probably be in another thread, like the Series 6 and 7 cards thread.

Clay
06-24-05, 06:49 PM
I believe that any motherboard with a PCI-E x16 slot is sufficient. Here is a current review of the latest offering from ASUS:
http://www.atomicmpc.com.au/article.asp?CIID=23377&SCID=15&srch_str=

Seph gPu
06-24-05, 07:12 PM
Thank you I will check the review out now.