PDA

View Full Version : Severe setback…irritating problem


TheJingo
07-24-05, 01:56 AM
Couple of days ago my PC started acting bizarrely, artifacts appear on screen, desktop icons devastated, Pc hangs and works awfully slow, then when I reboot its fine, my primary thinking was that its due to electric fluctuation which is norml here now a days Hence I install this utility PC alert 4 which came with my MSi neo Platinum, now it beeps constantly, here’s the Pic, kindly help me out here I,m going crazy.
6800GT’s temps are fine
3200+’s temps are fine too
something is wrong with the voltage

kindly help b4 i fry something :(
http://img.photobucket.com/albums/v408/thejingo/PcalertBeep.jpg

http://photobucket.com/albums/v408/thejingo/?action=view&current=PcalertBeep.jpg

TheJingo
07-24-05, 08:47 AM
http://img.photobucket.com/albums/v408/thejingo/mbm5.jpg
http://img.photobucket.com/albums/v408/thejingo/motherboardmonitor.jpg
http://img.photobucket.com/albums/v408/thejingo/nvtunePCalert4.jpg
http://img.photobucket.com/albums/v408/thejingo/corecentrevol.jpg

Is it my dear PC or these ****ed up buggy softwares, please help someone, please

PSYCHODAD
07-24-05, 12:22 PM
Don't know.....12v rail is a bit high.

|MaguS|
07-24-05, 12:26 PM
12.26v isn't high at all if his PSU can keep it up. My 12v is at 12.71v :o

PSYCHODAD
07-24-05, 12:28 PM
12.26v isn't high at all if his PSU can keep it up. My 12v is at 12.71v :o
Probably correct, I usually run mine a bit lower though.
Was kinda wondering why it showed in red on pc alert.

|MaguS|
07-24-05, 12:35 PM
I would recommend monitoring the voltage during load, it could be dropping.