View Full Version : Memory woes!

12-26-02, 11:57 AM
I have a KT3 Ultra2 board which supports the 333 ram.
My cpu is an xp2100+, and the 2700 ram
I want to run the stock speed for the cpu, but want the 333 speed of the ram.
So....here is the real question. What do I set the settings in the dram timing control?
I need the setting for...
-Configure sdram timming by....
---sdram frequency......
---sdram burst length....
Im a nubee to ddr ram
I just want my rig to run right for now.
I guess my Question is how do I set the ram to 333?
tks... hope you can help!

12-26-02, 12:24 PM
You have to make sure the board can run asynchronius frequencies - meaning the board has to have the capability to run the CPU at 133/266 and the ram at 166/333. There should be an option in your RAM settings in your BIOS to run the memory at 166 while still keeping your CPU at 133. The `sdram frequency' option should be what you need.

12-26-02, 09:18 PM
I figured it out thank you!!!:p