PDA

View Full Version : MAJOR PROBLEM, please help


SirDingo
12-23-05, 03:58 PM
Ok, I have been trying to get my newer parts up and running with my new Athlon64 X2-4400 cpu, well now that I am almost finished installing WinXP, it goes to blue screen error,

So I start the computer, it will POST, then it shows the WinXP load screen for like2sec, then BAM, blue screen thats says " A problem has been detected and windows has been shutdown to prevent damage to your computer"

Technical information;
*** STOP: 0x0000007B (0xF789E63C, 0X00000034, 0X00000000, 0X00000000)

retsam
12-23-05, 04:00 PM
ummm can you post the entire error message.

SirDingo
12-23-05, 04:06 PM
ummm can you post the entire error message.

That pretty much is the whole thing except a paragraph stating check your computer for viruses, check your hard drive to make sure it is properly installed...


This all started from last night, I made a thread about, with my new Athlon64 X2-4400, I installed the AMD X2 driver, then had some problems after the Micro$haft SP2 patch for the X2 cpu, and it got worse with the regedit I did for the X2 that is all over the web.

Now I am ****ed, I even did a repair install of WinXP, and cant get past the WinXP boot screen ?

SirDingo
12-23-05, 04:19 PM
I am going to install a FRESH WindowsXP right now, let's see what happen's ?

Tym
12-23-05, 05:28 PM
So I start the computer, it will POST, then it shows the WinXP load screen for like2sec, then BAM, blue screen thats says " A problem has been detected and windows has been shutdown to prevent damage to your computer"

Technical information;
*** STOP: 0x0000007B (0xF789E63C, 0X00000034, 0X00000000, 0X00000000)

Can you try and run Windows in safe mode? Does it stop at \windows\system32\acpidat.*?

If so, have you by any chance installed nV RAID drivers from a floppy during Windows install? If this is the case, and you have to use the driver (e.g. if you are setting the system up on an array), use an older one. 5.07 works for sure, it's part of the 6.39 package (http://www.nvidia.com/object/nforce_nf4_winxp_6.39.html). Then update it after the OS is installed completely.

I spent half a day trying to sort that out when it happened to me...