nuambenzina
02-28-06, 01:54 AM
:banghead: uhum I`m apologise if, i`m not posting in the right place, but i didn`t really know where shoud i put this one. I wish to install nvidia Video driver under my PC-BSD, or FreeBSD 6.0 but I wasn`t able to :(( , so i`ll need a little help. The videocard is on board,
"Motherboard Name PCChips M754LMR (3 PCI, 2 DIMM, Audio, Video, LAN, Modem)
Motherboard Chipset ALi M1631 ALADDiN TNT2
System Memory 224 MB (SDRAM)
BIOS Type AMI (12/12/00)
Communication Port Communications Port (COM1)
Communication Port Printer Port (LPT1)
Display:
Video Adapter NVIDIA Aladdin TNT2 (24 MB)
3D Accelerator nVIDIA RIVA TNT2
Monitor EIZO FlexScan F77 (701926425111)
I`m a newbie/noob so if you know how to please, explain me how to install it or, maybe if you know a tutorial... What I did/tryed do and dosen`t work :
" #cd /usr/ports/nvidia-driver
#make install WITH_LEGACY_GPU_SUPPORT "
I edited the /etc/X11 configuration file like:
"If you already have an X config file working with a different driver
(such as the 'nv' or 'vesa' driver), then all you need to do is find
the relevant Device section and replace the line:
Driver "nv"
(or Driver "vesa")
with
Driver "nvidia"
In the Module section, make sure you have:
Load "glx"
You should also remove the following lines:
Load "dri"
Load "GLcore" "
But the X dosen`t start, and give errors.
If I use "nv" driver my sistem FREEZE and die, keboard dosen`t respond on "ctrl+alt+shif/ctrl+alt+f1" etc. So i assume i need the nVidia videocard drive.
I didn`t find on http://www.nvidia.com/object/freebsd_archive.html a driver that will support AlladinTNT2 and freebsd 6.0 :afraid:
Some of X server configuration that i did tried/ operating sistems are here... http://www.linux.ro/forum/viewtopic.php?topic=23125&forum=37&14
Any suggestions, Ideeas will be welcomed.
"Motherboard Name PCChips M754LMR (3 PCI, 2 DIMM, Audio, Video, LAN, Modem)
Motherboard Chipset ALi M1631 ALADDiN TNT2
System Memory 224 MB (SDRAM)
BIOS Type AMI (12/12/00)
Communication Port Communications Port (COM1)
Communication Port Printer Port (LPT1)
Display:
Video Adapter NVIDIA Aladdin TNT2 (24 MB)
3D Accelerator nVIDIA RIVA TNT2
Monitor EIZO FlexScan F77 (701926425111)
I`m a newbie/noob so if you know how to please, explain me how to install it or, maybe if you know a tutorial... What I did/tryed do and dosen`t work :
" #cd /usr/ports/nvidia-driver
#make install WITH_LEGACY_GPU_SUPPORT "
I edited the /etc/X11 configuration file like:
"If you already have an X config file working with a different driver
(such as the 'nv' or 'vesa' driver), then all you need to do is find
the relevant Device section and replace the line:
Driver "nv"
(or Driver "vesa")
with
Driver "nvidia"
In the Module section, make sure you have:
Load "glx"
You should also remove the following lines:
Load "dri"
Load "GLcore" "
But the X dosen`t start, and give errors.
If I use "nv" driver my sistem FREEZE and die, keboard dosen`t respond on "ctrl+alt+shif/ctrl+alt+f1" etc. So i assume i need the nVidia videocard drive.
I didn`t find on http://www.nvidia.com/object/freebsd_archive.html a driver that will support AlladinTNT2 and freebsd 6.0 :afraid:
Some of X server configuration that i did tried/ operating sistems are here... http://www.linux.ro/forum/viewtopic.php?topic=23125&forum=37&14
Any suggestions, Ideeas will be welcomed.