PDA

View Full Version : need help with OC


kam03
05-16-06, 10:26 PM
Currently my cpu is running at 2.6ghz with 250 fsb x 10.5 settings. The voltage is set to auto.

I would like to oc to 2.7 ghz with the ram still running at its default 200mhz speed. I oc’ed the system with the settings 250 fsb x 11 but the system crashes on 3d mark 06 benchmark. Do I need to increase the cpu voltage? What shell I increase it to? the cpu voltage was set to auto? or do I need to change my fsb and multiplier settings?


Thanks

a12ctic
05-17-06, 12:12 AM
2.6 might be all you can get, try 256-258 fsb, if that wont run stable id just stick with the 2.6, increasing the voltage has never went well for me

nekrosoft13
05-17-06, 12:31 AM
are you still on stock voltage?

increasing it slightly is not bad, just make sure your heatsink can take it