PDA

View Full Version : DFI 975x + OCZ pc6400 = no POST


bendedavis
09-18-06, 09:19 PM
I cannot get my system to boot with this memory

http://www.newegg.com/Product/Product.asp?Item=N82E16820227115

I have two sticks of it.

and this motherboard

http://www.newegg.com/Product/Product.asp?Item=N82E16813136168

I bought a cheap stick of 512mb memory from Staples and the system boots. I need to know what to change in the BIOS in order for it to recognize my OCZ memory, btw I've updated to the latest BIOS, cleared cmos and still nothing works. any help would be greatly appreciated. thanks

Xion X2
09-19-06, 10:39 AM
First things first: Check your motherboard manual and make sure you have that type of memory installed correctly. Some boards have different installation requirements for single/dual channel RAM.

Next, try increasing the DDR voltage.

Next, try messing with the timings. Increase the CAS latency.