Does the NV34 [GeForce FX 5200] 0x322 support 1920 x 1200

[tobiasj]

Hi,

I can't get my GeForce FX 5200 to work with 1920 x 1200 at 60 Hz.
Is that a problem with the driver or doesn't the FX 5200 support this resolution?

[Heinz68]

According to the BFG specifications it does support the resolution.
http://www.bfgtech.com/5200_256.html
According to NVIDIA specs it doesn't support it over DVI
http://www.nvidia.com/page/pg_20040109440047.html

If your monitor doesn't support the resolution it wont show in the settings.

You asked the question in wrong forum,

[tobiasj]

According to the BFG specifications it does support the resolution.
http://www.bfgtech.com/5200_256.html
According to NVIDIA specs it doesn't support it over DVI
http://www.nvidia.com/page/pg_20040109440047.html

Does anyone know an card, that supports that resolution over DVI and without a fan?

If your monitor doesn't support the resolution it wont show in the settings.

The Monitor does support the resolution. It's a Del 24".

You asked the question in wrong forum,
Ups, sorry

[Bman212121]

I'm going to venture that any 6 series or 7 series will be able to do it.
6200 is a yes, so I can assume that the 7600 will. http://www.nvidia.com/page/pg_20050307904988

You two best bets are the 6200 and the 7600gs. If you want to game, the 7600gs would be preferred. I chose AGP cause your most likely using that interface now.

Gigabyte 7600GS
http://www.newegg.com/Product/Product.asp?Item=N82E16814125039

Asus 6200
http://www.newegg.com/Product/Product.asp?Item=N82E16814121542

[Dazz]

You need a dual link DVi to get 1920 x 1200 or higher.

[nIghtorius]

You need a dual link DVi to get 1920 x 1200 or higher.

No you do not.

My old 6800GT (singlelink) supported 1920x1200 on my 24" dell over DVI. Because it just could do a higher clockrate on the singlelink interface. 2560x1600 kinda resolutions however do require duallink DVI

[legends]

It does support 1960x1080 over DVI-D because I am doing that now in Windows with a BenQ G2420HD LCD monitor. I think Nvidia has some errors in their spec and this is causing me hassles whenever I try to use their drivers with this card on any Linux distro, when trying to use the Native monitor resolution of a 24inch widescreen LCD it just wont allow more than 1600x900 with version 173 and version 96 is limited to 800x600 for me in some distros.