OC Noob

[Chu-Dog]

Hey Guys, Im an overclocking noob. I understand the basics and read alot about it, but lets say math is not my bag. Was wondering if anyone can give me pointers and advice on how to get my FX-62 over 3.0ghz.
First let me explain what i did so far:
-on my Asus M2N32-SLI Deluxe Mobo i just pushed the bus speed to 208, kept the multiplier at 14. so the core speed is 2.91.

-the Corsair DDR2-800 (4-4-4-12) is running at 830 Mhz.

-Everything on the mobo except for the altered bus speed is running at stock (voltages, PCI-E speed, memory timings are all set to auto.)

So with yalls knowledge, i am wondering how to get this thing to run stable at 3.0 or above, given the tight memory times.
I have some slack to work with heatwise on the proc, im using liquid cooling and i usually get a 29-30C idle temp. about 35C under full load. the full specs of my rig are in my signature. Any advice/opinion is appreciated. :) - Chris

[sillyeagle]

Well normally you want to drop your memory multiplier and HTT so you are overclocking only the CPU, that way you know the wall is not the memory or HTT.

Once You find the CPU max then you can try overclocking the memory.

If the CPU tops out at 2.9, try adding some voltage, like .05, or .1 volts and then see if it will go any higher.

[Chu-Dog]

Well normally you want to drop your memory multiplier and HTT so you are overclocking only the CPU, that way you know the wall is not the memory or HTT.

Once You find the CPU max then you can try overclocking the memory.

If the CPU tops out at 2.9, try adding some voltage, like .05, or .1 volts and then see if it will go any higher.

Hey i cant find an HTT or Memory Multiplier setting in my M2N32-SLI Deluxe BIOS. Anyone with this mobo know of these functions and where to find them?