Hambone
12-30-06, 07:05 AM
Crucial Ballistix 2GB (2 x 1GB) 240-Pin DDR2 1000 (PC2 8000)
Model #: BL2KIT12864AA1005
http://www.newegg.com/Product/Product.asp?Item=N82E16820146563
5-5-5-15 2T 2.2v
Micro D9 chips (D9GMH)
Comprehensive D9GMH Chip guide: http://ramlist.ath.cx/ddr2/
I'm not impressed with the results of messing with the timmings. 3 FPS at best? Maybe memory is just not a bottleneck on my system.
FAILURES
(Decided NOT to got above 1.375v)
4-4-4-08 1T at 1.375v/0800Mhz (400Mhz) would not pass SuperPI in XP
5-5-5-15 1T at 1.375v/1000Mhz (500Mhz) would not POST
3-3-3-08 2T at 1.375v/1000Mhz (500Mhz) would not POST
CRUCIAL LOVE
Memory survived 6 unstable Windows XP boots, 10 BIOS Post Failures, and 2.375v for an extended time without a problem. After testing I rechecked 4-4-4-12 (2T) at 1000Mhz with Memtest86+ overnight and it was still good. I'm gonna leave it at these timings but I want to do some more checks with 3DMark06 because it's results for these timings didn't make sense.
RIG
EVGA 680i
E6600 Intel C2D
Memory - Duh
EVGA 8800GTS
PC POWER AND COOLING 750W SILENCER
CPU OVERCLOCK
CPU: E6600
CPU SPEED: 3.375 Ghz
CPU MULTIPLIER: 9
FSB SPEED: 1500 Mhz (~ linked 1:1)
CPU vCore: 1.35v
CPU FSB Voltage: [DEFAULT]
NFORCE SPP: DEFAULT]
COOLING: Zalman 9700 / x4 Case Fans (21db, 27.8 CFM)
CPU TEMP: Using TAT
Desktop Idle 43C
Gaming 51C
Prime95 Average 56C
Prime95 Max 60C
STABILITY VERIFIED BY: Dual-Prime95 12 Hours
SETUP
3DMARK - standard 1280x1020 run with no AA
HL2 LOST COST -1680x1050, x4 FSAA, Grahpics MAX except shadows & water reflection
SETUP SCREW UP
For SuperPI, a 2M digits test was not enough to really show much of anything. Live and learn.
RESULTS
HL2 Lost Cost Stress Test
(0800Mhz) 5-5-5-15 (2T) 2.200v 166.37 FPS
(1000Mhz) 5-5-5-15 (2T) 2.200v 168.12 FPS
(0800Mhz) 4-4-4-12 (2T) 2.200v 169.03 FPS
(0800Mhz) 3-3-3-08 (2T) 2.325v 168.54 FPS
(1000Mhz) 4-4-4-12 (2T) 2.200v 169.66 FPS
SiSoft Sandra memory Sub Systems
(0800Mhz) 5-5-5-15 (2T) 2.200v 6562 MB/s Bandwith Int Buff'd
(0800Mhz) 5-5-5-15 (2T) 2.200v 6524 MB/s Bandwith Float Buff
(1000Mhz) 5-5-5-15 (2T) 2.200v 6945 MB/s Bandwith Int Buff'd
(1000Mhz) 5-5-5-15 (2T) 2.200v 6928 MB/s Bandwith Float Buff
(0800Mhz) 4-4-4-12 (2T) 2.200v 7049 MB/s Bandwith Int Buff'd
(0800Mhz) 4-4-4-12 (2T) 2.200v 7041 MB/s Bandwith Float Buff
(0800Mhz) 3-3-3-08 (2T) 2.325v 7304 MB/s Bandwith Int Buff'd
(0800Mhz) 3-3-3-08 (2T) 2.325v 7365 MB/sBandwith Float Buff
(1000Mhz) 4-4-4-12 (2T) 2.200v 7712 MB/s Bandwith Int Buff'd
(1000Mhz) 4-4-4-12 (2T) 2.200v 7643 MB/sBandwith Float Buff
SuperPI 2M
(0800Mhz) 5-5-5-15 (2T) 2.200v 40s
(1000Mhz) 5-5-5-15 (2T) 2.200v 38s
(0800Mhz) 4-4-4-12 (2T) 2.200v 40s
(1000Mhz) 4-4-4-12 (2T) 2.200v 38s
(0800Mhz) 3-3-3-08 (2T) 2.325v 38s
3DMark06
(0800Mhz) 5-5-5-15 (2T) 2.200v 8942
(0800Mhz) 4-4-4-12 (2T) 2.200v 8999
(1000Mhz) 5-5-5-15 (2T) 2.200v 9007
(1000Mhz) 4-4-4-12 (2T) 2.200v 8967 (very odd .. 2nd run confirms. 8966)
(0800Mhz) 3-3-3-08 (2T) 2.325v 9014
Model #: BL2KIT12864AA1005
http://www.newegg.com/Product/Product.asp?Item=N82E16820146563
5-5-5-15 2T 2.2v
Micro D9 chips (D9GMH)
Comprehensive D9GMH Chip guide: http://ramlist.ath.cx/ddr2/
I'm not impressed with the results of messing with the timmings. 3 FPS at best? Maybe memory is just not a bottleneck on my system.
FAILURES
(Decided NOT to got above 1.375v)
4-4-4-08 1T at 1.375v/0800Mhz (400Mhz) would not pass SuperPI in XP
5-5-5-15 1T at 1.375v/1000Mhz (500Mhz) would not POST
3-3-3-08 2T at 1.375v/1000Mhz (500Mhz) would not POST
CRUCIAL LOVE
Memory survived 6 unstable Windows XP boots, 10 BIOS Post Failures, and 2.375v for an extended time without a problem. After testing I rechecked 4-4-4-12 (2T) at 1000Mhz with Memtest86+ overnight and it was still good. I'm gonna leave it at these timings but I want to do some more checks with 3DMark06 because it's results for these timings didn't make sense.
RIG
EVGA 680i
E6600 Intel C2D
Memory - Duh
EVGA 8800GTS
PC POWER AND COOLING 750W SILENCER
CPU OVERCLOCK
CPU: E6600
CPU SPEED: 3.375 Ghz
CPU MULTIPLIER: 9
FSB SPEED: 1500 Mhz (~ linked 1:1)
CPU vCore: 1.35v
CPU FSB Voltage: [DEFAULT]
NFORCE SPP: DEFAULT]
COOLING: Zalman 9700 / x4 Case Fans (21db, 27.8 CFM)
CPU TEMP: Using TAT
Desktop Idle 43C
Gaming 51C
Prime95 Average 56C
Prime95 Max 60C
STABILITY VERIFIED BY: Dual-Prime95 12 Hours
SETUP
3DMARK - standard 1280x1020 run with no AA
HL2 LOST COST -1680x1050, x4 FSAA, Grahpics MAX except shadows & water reflection
SETUP SCREW UP
For SuperPI, a 2M digits test was not enough to really show much of anything. Live and learn.
RESULTS
HL2 Lost Cost Stress Test
(0800Mhz) 5-5-5-15 (2T) 2.200v 166.37 FPS
(1000Mhz) 5-5-5-15 (2T) 2.200v 168.12 FPS
(0800Mhz) 4-4-4-12 (2T) 2.200v 169.03 FPS
(0800Mhz) 3-3-3-08 (2T) 2.325v 168.54 FPS
(1000Mhz) 4-4-4-12 (2T) 2.200v 169.66 FPS
SiSoft Sandra memory Sub Systems
(0800Mhz) 5-5-5-15 (2T) 2.200v 6562 MB/s Bandwith Int Buff'd
(0800Mhz) 5-5-5-15 (2T) 2.200v 6524 MB/s Bandwith Float Buff
(1000Mhz) 5-5-5-15 (2T) 2.200v 6945 MB/s Bandwith Int Buff'd
(1000Mhz) 5-5-5-15 (2T) 2.200v 6928 MB/s Bandwith Float Buff
(0800Mhz) 4-4-4-12 (2T) 2.200v 7049 MB/s Bandwith Int Buff'd
(0800Mhz) 4-4-4-12 (2T) 2.200v 7041 MB/s Bandwith Float Buff
(0800Mhz) 3-3-3-08 (2T) 2.325v 7304 MB/s Bandwith Int Buff'd
(0800Mhz) 3-3-3-08 (2T) 2.325v 7365 MB/sBandwith Float Buff
(1000Mhz) 4-4-4-12 (2T) 2.200v 7712 MB/s Bandwith Int Buff'd
(1000Mhz) 4-4-4-12 (2T) 2.200v 7643 MB/sBandwith Float Buff
SuperPI 2M
(0800Mhz) 5-5-5-15 (2T) 2.200v 40s
(1000Mhz) 5-5-5-15 (2T) 2.200v 38s
(0800Mhz) 4-4-4-12 (2T) 2.200v 40s
(1000Mhz) 4-4-4-12 (2T) 2.200v 38s
(0800Mhz) 3-3-3-08 (2T) 2.325v 38s
3DMark06
(0800Mhz) 5-5-5-15 (2T) 2.200v 8942
(0800Mhz) 4-4-4-12 (2T) 2.200v 8999
(1000Mhz) 5-5-5-15 (2T) 2.200v 9007
(1000Mhz) 4-4-4-12 (2T) 2.200v 8967 (very odd .. 2nd run confirms. 8966)
(0800Mhz) 3-3-3-08 (2T) 2.325v 9014