PDA

View Full Version : 1.0-9746, Sun Ultra20, Quadro FX1500 8-bit overlay problem


axiology
01-23-07, 02:08 PM
Hi,
We have an Ultra20 with dual Acer 1680x1050 monitors. When an 8 bit overlay window is moved to the second monitor, the contents of the window is shifted to the right about 1/8 inch, so that it extends outside the right edge of the window. This is with a gui type window. With a 8 bit window displaying graphics, the contents of the window appears shifted the same, but in addition, when displaying a graph over top of a seismic data display - the points on the graph, displayed using X's, do not line up with the graph line. We have had to revert to 1.0-8776 to get rid of this problem. Unfortunately 8776 has a different problem with 8 bit overlay mode; it regularly causes the desktop to freeze up, requiring Xorg to be restarted.

Andrew Riggs
Arcis

netllama
01-23-07, 02:10 PM
Which application is required to reproduce this problem?

axiology
01-23-07, 03:03 PM
It's seismic data processing software called "Focus" made by Paradigm (www.paradigmgeo.com). I doubt that helps much. It's the only program we use that needs the 8 bit mode.
Andrew

axiology
04-18-07, 02:00 PM
I've managed to find a remedy for this problem. None of the newer drivers are a fix.

The problem goes away as long as the following option line is added to the xorg.conf:

Option "TwinViewOrientation" "LeftOf"

Older drivers do not exhibit this behavoir.

Andrew