Overclocking Advice

[Darren555]

I am thinking of overclocking my XP2400+cpu (unlocked).
What do ya reckon I should be able to get it up to with stability the main factor?
What changes should I make to my CPU V core voltage? Also what should I set the BIOS cpu/memory ratio too? At the moment it is 4:5.
Current loaded temp is 34c & Mobo 25c

XP2400+
512MB Samsung original DDR2700
Asus A7V333
80GB Maxtor Diamondmax Plus 7200rpm ATA133
Macron 400 Watt PSU
Crucial Radeon 9700 Pro
Soundblaster Audigy Player
Windows XP Pro SP1
Catalyst 3.2

[butter]

well i have a xp2400 and a hhc-001 cooler from coolmaster and i can run stable at 2.316 ghz.
voltage 1.8-1.5

[Darren555]

Just experimenting with my standard heatsink and fan combo, I have upped the FSB to 166/33mhz, lowered the multiplier to 13x, adjusted the memory ratio to 1:1 & set the memory timings to SPD (CAS2.5) as before I ran it at CAS2. I also upped the core voltage to 1.75.
That gives me 2.17Ghz which I believe makes it an XP2700+!!
My temps are now CPU 37c & mobo 33c.
It seems rock solid.
Am now considering getting some Corsair RAM so I can run at CAS2 to go with a better heatsink& fan & the Samsung stuff will not have it.
Is this any good and how much further should I go?? I do not wanna fry anything.

Darren

[Darren555]

I have installed a Thermalright SLK-800 & YS-TECH 80mm 45cfm fan & at stock speeds my XP2400+ averages 26c & mobo 28c. Is this good & can I expect the temp to drop futher when my artic silver III beds in a bit?

Darren