PDA

View Full Version : Mircosoft ISA Connection Problem


oushi.eg
06-12-07, 05:48 PM
Hi Guys , i have a problem to connect into my local network from the internet , through VPN .
all settings has done with the ISA config Guide . but i am geeting a weird the follwing message when i try to connect :
" the client could not connect to the remote computer ,Remote connections might not be enabled or the computer might be too busy to accept new connections " every thing is ok on the ISA and the remote connections is enabled. any advice ??

evilghost
06-12-07, 05:49 PM
Does your router support PPTP passthrough and protocol 47 (GRE)?

oushi.eg
06-12-07, 05:53 PM
Does your router support PPTP passthrough and protocol 47 (GRE)?

I don't know what r u talking about , but i already made a VPN Connection in the same network Before !!!

lduguay
06-12-07, 05:58 PM
I don't know what r u talking about , but i already made a VPN Connection in the same network Before !!!
So PPTP is working, so what are you trying to do? Map a drive, Remote desktop?

evilghost
06-12-07, 05:59 PM
Sounds like RDP to an ISA server, the way it was originally worded it sounded like a PPTP issue on the RRAS server.

oushi.eg
06-12-07, 06:19 PM
Sounds like RDP to an ISA server, the way it was originally worded it sounded like a PPTP issue on the RRAS server.

it's a remote desktop connection , do u mean the problem @ my ISP servers ?
thx Guys for the reply

Bman212121
06-12-07, 07:41 PM
If I understand you correctly you can VPN into your LAN from the internet, but you cannot access the ISA server's RDP. It sounds like you turned on remote access, but you need to create a rule to allow it through ISA's firewall. Is that correct or did I not understand what you meant?

oushi.eg
06-13-07, 05:33 AM
If I understand you correctly you can VPN into your LAN from the internet, but you cannot access the ISA server's RDP. It sounds like you turned on remote access, but you need to create a rule to allow it through ISA's firewall. Is that correct or did I not understand what you meant?

there is a VPN access rule on the ISA

oushi.eg
06-13-07, 08:03 AM
i found the problem , i was trying to connect using Remote desktop. the correct way to connect is to setup a VPN connection from the remote computer and then i can connect with the REMOTE DESKTOP.thx guys for your efforts