E6850

[lee63]

Not bad at all :D

http://img510.imageshack.us/img510/5356/untitledkn5.jpg (http://imageshack.us)

[stncttr908]

Nice, but why not go quad?

[lee63]

Nice, but why not go quad?I have a G0 step Quad coming also ;)

[Greasy]

Wow, almost 4Ghz. Damn, I'm going to wait for G0 for sure now.

[Single Player]

where did you get it? i wanna buy one too.. and how much is 6850 cost?

[lee63]

where did you get it? i wanna buy one too.. and how much is 6850 cost?
I got it here http://www.allstarshop.com/shop/shop.asp?sid=V84B57H68XEU8GC3WF1M1B8AUR113RTC

[nV`andrew]

wow that is so sexy can't wait for my e6750. will the prices for it be lower after the 22nd than what they are selling it for now?

[Mr_LoL]

Isn't a high vcore bad for the processor in the long run?

[breathemetal]

Nice, but im gonna wait till the quads come down to upgrade

[Madpistol]

Isn't a high vcore bad for the processor in the long run?

What are you smoking dude? 1.35V is barely above stock. It takes 1.5V on my current processor to hit 3.6Ghz.

That processor is sick! I'm jealous. :p

BTW, that CAN'T be air cooled. It has to be water underwater. Those temps are awesome.

[Amuro]

Nice temps. What kinda water cooling you have?

[CaptNKILL]

What are you smoking dude? 1.35V is barely above stock. It takes 1.5V on my current processor to hit 3.6Ghz.

That processor is sick! I'm jealous. :p

BTW, that CAN'T be air cooled. It has to be water underwater. Those temps are awesome.
According to speedfan its running at 1.58

[JasonPC]

Yeah I'm curious about what type of cooling solution you have as well.

[mullet]

WOW kickass Lee.

[Madpistol]

According to speedfan its running at 1.58

You are indeed correct. That sounds much more resonable.

I wonder what's causing the error on Core temp and CPU-Z...

[Amuro]

You are indeed correct. That sounds much more resonable.

I wonder what's causing the error on Core temp and CPU-Z...
Core Temp is simply showing the voltage it reads from the processor's Voltage Identification (VID) pins, which is set at the factory to indicate to the motherboard that this voltage is the maximum voltage allowed by the processor. VID is not the actual VCore set by the motherboard.

[slaWter]

Very nice Lee. You CPU junkie you ;)

[Mr_LoL]

What are you smoking dude? 1.35V is barely above stock. It takes 1.5V on my current processor to hit 3.6Ghz.

That processor is sick! I'm jealous. :p

BTW, that CAN'T be air cooled. It has to be water underwater. Those temps are awesome.
I think you are the one smoking low quality crack. According to the screenshot it's running at 1.58 vcore :p

[Madpistol]

I think you are the one smoking low quality crack. According to the screenshot it's running at 1.58 vcore :p

This is what crack does to you -> :headexplode:







This is what crack does to me -> :scarey:

I wish I could run my E6600 @ 1.58 Vcore. :(

[Burner_Tbird2]

I'm guessing this is just a speed run for Lee, 3.9Ghz is about 1Ghz more than anyone needs right now for any game on the market :D

I run my E6700 at 1.43V to get up to 3.4Ghz, any more voltage and I'd have to switch to a WC setup for the heat.

[Saintster]

I'm guessing this is just a speed run for Lee, 3.9Ghz is about 1Ghz more than anyone needs right now for any game on the market :D

I run my E6700 at 1.43V to get up to 3.4Ghz, any more voltage and I'd have to switch to a WC setup for the heat.


I've got my 6600 to boot and run windows at 3.8 with 1.52 vcore but the temps were high 40's and under load was 63 and it was not prime stable plus I prefer the timings I have over the speed. At these settings it's 11 hours prime stable. I'm going to play the waiting game something tells me I'll need to upgrade my GPU before the CPU.

[Madpistol]

I've gotten my Rig up to 3.6Ghz Benchable, and also seems to be Orthos stable for the 30 minutes I tested it at. I'm not willing to keep it under that strain any longer than that. Temps are quite high though. Load on Dual Orthos is around 63C, so I don't want to push it any higher than that.

[lee63]

Oh my :headexplode:

http://img340.imageshack.us/img340/9784/untitledkx0.jpg (http://imageshack.us)

I just cant get it stable though :( this guy has the exact chip as mine http://www.xtremesystems.org/forums/showpost.php?p=2321493&postcount=134 WTF

[slaWter]

Ah too bad it's not stable. What's your vcore?
Good luck Lee, go for it ;)

[lee63]

http://img523.imageshack.us/img523/5977/3dmarkkm4.jpg (http://imageshack.us)

Vcore, 1.6 in Windows, 1.58 in the Bios