nV News Forums

 
 

nV News Forums (http://www.nvnews.net/vbulletin/index.php)
-   NVIDIA Linux (http://www.nvnews.net/vbulletin/forumdisplay.php?f=14)
-   -   nearly cloned to TV but not quite (http://www.nvnews.net/vbulletin/showthread.php?t=102561)

mckechan 11-17-07 05:41 AM

nearly cloned to TV but not quite
 
I have so very nearly cloned my monitor to TV. I have been trying for a week.
I have a GeForce 7600GT and run Ubuntu Gutsy. I have an NEC MultiSync 75f monitor and a UK PAL TV.

The TV image is flickering too much. The colour might not be there but that could just be due to the flicker.

Some of my failed xorg.confs booted in failsafe ("vesa" driver) mode where the monitor and TV screen were in perfect unison but I could only have 640x480 so surely it must be possible.

I need my monitor to be on 1280x1024.

I would be very grateful if someone can help my diagnose my xorg.conf.
Many thanks in advance...

Quote:

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder3) Thu Oct 4 10:34:46 PDT 2007

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Thu Oct 4 10:33:51 PDT 2007
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"

# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection

Section "Files"
EndSection

Section "Module"
Load "glx"
EndSection

Section "ServerFlags"
Option "Xinerama" "0"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "gb"
Option "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Monitor"
Identifier "Generic Monitor"
HorizSync 30.0 - 65.0
VertRefresh 50.0 - 75.0
Option "DPMS"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "NEC MultiSync 75F"
HorizSync 31.0 - 70.0
VertRefresh 60.0
EndSection

Section "Device"
Identifier "NVIDIA GeForce 7600GT"
Driver "nvidia"
EndSection

Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7600 GT"
BusID "PCI:3:0:0"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "NVIDIA GeForce 7600GT"
Monitor "Generic Monitor"
DefaultDepth 24
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "1"
Option "metamodes" "CRT: 1280x1024 +0+0, TV: nvidia-auto-select +0+0; CRT: 1152x864 +0+0, TV: nvidia-auto-select +0+0; CRT: 1152x768 +0+0, TV: nvidia-auto-select +0+0; CRT: 1024x768 +0+0, TV: nvidia-auto-select +0+0; CRT: 800x600 +0+0, TV: nvidia-auto-select +0+0; CRT: 640x480 +0+0, TV: nvidia-auto-select +0+0"
EndSection

Section "Extensions"
Option "Composite" "Enable"
EndSection




Thunderbird 11-17-07 05:50 AM

Re: nearly cloned to TV but not quite
 
Clone mode means that the same image is shown on your TV and normal monitor AT the same resolution. If the resolutions are not the same the image is NOT scaled, so if the monitor is at 1280x1024 and the TV at 640x480 you only see a small part of the image from the monitor on your TV.

mckechan 11-17-07 05:53 AM

Re: nearly cloned to TV but not quite
 
Okay, well it looked like it was a correct sized image on the TV and it was just the flicker that was the problem. Are you able to help me make a new xorg.conf that will achieve what I want?

Cheers

Thunderbird 11-17-07 06:19 AM

Re: nearly cloned to TV but not quite
 
The easiest thing to do is to use nvidia-settings with the option DynamicTwinview turned on in your xorg.conf. Use nvidia-settings to set up the configuration you want and let it output a config file.

mckechan 11-17-07 06:47 AM

Re: nearly cloned to TV but not quite
 
I have tried a few things but it is still not working. I switched of clone and put the screen to the TV to 'right of' but this isn't what I want. It means the screens are split. In terms of the size of the screen it seemed better when I was using clone

Anyway the main problem is still with the flicker and lack of colour. I tried nvidia-xconfig --dynamic-twinview but that didn't seem to change anything.

I realise these whiny forum posts are annoying but I have tried so many xorg.confs over the last week that I would really appreciated it if someone could take a look at my xorg.conf and make some direct suggestions.

Many thanks

current xorg.conf:
Quote:

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder3) Thu Oct 4 10:34:46 PDT 2007

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Thu Oct 4 10:33:51 PDT 2007
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"

# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection

Section "Files"
EndSection

Section "Module"
Load "glx"
EndSection

Section "ServerFlags"
Option "Xinerama" "0"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "gb"
Option "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Monitor"
Identifier "Generic Monitor"
HorizSync 30.0 - 65.0
VertRefresh 50.0 - 75.0
Option "DPMS"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "NEC MultiSync 75F"
HorizSync 31.0 - 70.0
VertRefresh 55.0 - 120.0
EndSection

Section "Device"
Identifier "NVIDIA GeForce 7600GT"
Driver "nvidia"
EndSection

Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7600 GT"
BusID "PCI:3:0:0"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "NVIDIA GeForce 7600GT"
Monitor "Generic Monitor"
DefaultDepth 24
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "1"
Option "metamodes" "CRT: 1280x1024_60 +0+0, TV: 640x480_60 +1280+0; CRT: 800x600 +0+0, TV: 640x480_60 +800+0; CRT: 640x480 +0+0, TV: 640x480_60 +640+0"
EndSection

Section "Extensions"
Option "Composite" "Enable"
EndSection



All times are GMT -5. The time now is 02:15 AM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.