nV News Forums

 
 

nV News Forums (http://www.nvnews.net/vbulletin/index.php)
-   NVIDIA Linux (http://www.nvnews.net/vbulletin/forumdisplay.php?f=14)
-   -   No success in getting 1080i work fine.... (http://www.nvnews.net/vbulletin/showthread.php?t=102563)

paddy3k 11-17-07 07:01 AM

No success in getting 1080i work fine....
 
Hi,

I'm new here, and try to get 1920x1080i work on my Ubuntu 7.10 Linux, since 2 days.
I tried a thousend modelines, different drivers, read about 300 pages of user
who haves the same problems... I'm getting crazy :-( ...

I don't care about 3D accell. or such things, cause I'm using Linux just to develop
software, but this is impossible in this nasty 1280x720 resolution mode which
i get at the top end O_O

I'm tired of getting this work, therefore I wanted to ask if there any driver version
or tweak to get 1080i work fine ? I don't care about nvidia driver or "software driver" all I want is 1080i ...

my setup:

Ubuntu 7.10
Geforce8800 GTX
Toshiba 42 WL67Z LCD TV

under win vista, all runs fine, 1080i @30 Hz...

thanks in advance :)
paddy

philvid 11-17-07 06:08 PM

Re: No success in getting 1080i work fine....
 
good luck paddy. nVidia are deliberately ignoring posts, pms and emails about interlacing on linux.

I also have problems with interlacing, it displays but its missing half the lines and gets crazy artifacts when video plays back. Normal display appears low resolution and stretched.

I don't know why they don't even bother to respond or troubleshoot these issues, or even acknowledge their existence. jeez even if they said theres no problem on their test displays it would be a start. maybe its just too hard for them?

paddy3k 11-18-07 03:30 AM

Re: No success in getting 1080i work fine....
 
thats annoying ! I don't even get the half screen, which many people talk about here... my display always stays black in resolutions > 1280x720....

i'm not sure, but I thought that some guy got 1080i work fine in a earlier driver
version... 100.14.09 or something like that?! Would be nice if those people could
post here their driver version an xorg.conf.

regards
paddy3k

paddy3k 11-18-07 10:25 AM

Re: No success in getting 1080i work fine....
 
OMG, i cant believe..... it runs fine NOW, AFTER 3 days pure sadness O_O

All I changed, hm don't know all, but i was playing around with the polarities, using another modeline (even those powerstrip generated doesn't worked).... and I'm using driver 100.14.11 now...
maybe not the best, but I'm sooooooooo infinite happy that it works now, nobody
can imagine O_O

My xorg.conf :

Code:

Section "Device"

        Identifier        "Geforce8"

        Boardname        "NVIDIA GeForce 8 Series"

        Busid                "PCI:1:0:0"

        Driver                "nvidia"

        Screen        0



        Option "AddARGBGLXVisuals" "True"

            Option "DisableGLXRootClipping" "true"

       

        Option "ExactModeTimingsDVI" "true"

        Option "FlatPanelProperties" "Scaling=Native"


        Option  "ModeValidation" "NoVertRefreshCheck"



EndSection



Section "Monitor"

        Identifier        "TSB"

        Vendorname        "TSB-TV"

        Modelname        "42 WL67 Z"

        VertRefresh        49-61

        HorizSync        15-46



        Modeline "1920x540" 74.250 1920 2448 2492 2640 540 574 579 562 -hsync -vsync

        Modeline "1920x1080" 74.250 1920 2448 2492 2640 1080 1148 1158 1124 interlace -hsync -vsync

        Modeline "720x576" 27.000 720 732 796 864 576 581 586 625 -hsync -vsync



        ModeLine "1920x1080_NEW" 74.250 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync

       

        Gamma        1.0

EndSection



Section "Screen"

        Identifier        "Default Screen"

        Device                "Geforce8"

        Monitor                "TSB"

        Defaultdepth        24

        SubSection "Display"

                Depth        24

                Modes                "1920x1080_NEW" "1920x540" "1920x1080" "720x576" "1280x720_50"

        EndSubSection

EndSection



Section "ServerLayout"

        Identifier        "Default Layout"

  screen 0 "Default Screen" 0 0

        Inputdevice        "Generic Keyboard"

        Inputdevice        "Configured Mouse"

EndSection

Modepool :

Code:

(II) NVIDIA(0): --- Modes in ModePool for TSB-TV (DFP-1) ---
(II) NVIDIA(0): "nvidia-auto-select" : 1920 x 1080 @ 100.1 Hz Interlace  (from: EDID)
(II) NVIDIA(0): "1920x1080"          : 1920 x 1080 @ 120.1 Hz Interlace  (from: EDID)
(II) NVIDIA(0): "1920x1080_NEW"      : 1920 x 1080 @  60.0 Hz Interlace  (from: X Configuration file ModeLine)

Code:

(II) NVIDIA(0): "nvidia-auto-select" : 1920 x 1080 @ 100.1 Hz Interlace
(II) NVIDIA(0): "1920x1080_120i_0"  : 1920 x 1080 @ 120.0 Hz Interlace
(II) NVIDIA(0): "1920x1080_50i"      : 1920 x 1080 @  50.0 Hz Interlace

yeaaaahawww, hope that someone else can be successful with these settings :o)

bye
paddy3k


All times are GMT -5. The time now is 03:38 AM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.