nV News Forums

 
 

nV News Forums (http://www.nvnews.net/vbulletin/index.php)
-   Crysis (http://www.nvnews.net/vbulletin/forumdisplay.php?f=59)
-   -   High settings 1920x1200 30fps? (http://www.nvnews.net/vbulletin/showthread.php?t=104086)

mythy 12-11-07 01:41 PM

High settings 1920x1200 30fps?
 
what gives? I am magically pulling 30FPS in multilayer with the latest drivers .21's The last drivers I had were the certs from a month ago so maybe I missed some thing... And thats with 64bit and DX10!

When did we get the performance jump in drivers?

Ambrose 12-11-07 02:29 PM

Re: High settings 1920x1200 30fps?
 
No clue, but I'm gonna have to grab those... :captnkill:

mumstheword 12-11-07 04:25 PM

Re: High settings 1920x1200 30fps?
 
Barely anything noticeable for me. Maybe 1fps average overall.

SH64 12-11-07 04:34 PM

Re: High settings 1920x1200 30fps?
 
Gives us some scroes before/after if we are to judge.

mythy 12-11-07 04:36 PM

Re: High settings 1920x1200 30fps?
 
if you think I'm swapping back drivers on this nearly clean install then your nuts :p I'll take sum in game tho with the new drivers :D

SH64 12-11-07 04:40 PM

Re: High settings 1920x1200 30fps?
 
Quote:

Originally Posted by mythy
if you think I'm swapping back drivers on this nearly clean install then your nuts :p I'll take sum in game tho with the new drivers :D

I assumed you had recorded some scores before you install these :p (guess not much people have notebooks to write down their PC scores/benchmarks like me :p)

oh well i have some scores recorded with .09s so when i install the .21s i'll see for myself :cool:

agentkay 12-11-07 04:45 PM

Re: High settings 1920x1200 30fps?
 
Quote:

Originally Posted by SH64
I assumed you had recorded some scores before you install these :p (guess not much people have notebooks to write down their PC scores/benchmarks like me :p)

oh well i have some scores recorded with .09s so when i install the .21s i'll see for myself :cool:

I'll do the same in a few hours as well. :)

mythy 12-11-07 04:54 PM

Re: High settings 1920x1200 30fps?
 
I was running the 169.02's:o Only 1 1/2 moths old tho

CDE_1246 12-11-07 09:08 PM

Re: High settings 1920x1200 30fps?
 
Are you really getting a big FPS increase with the latest drivers?

agentkay 12-11-07 10:30 PM

Re: High settings 1920x1200 30fps?
 
I've noticed a decent jump in MP on "Shore", with the previous driver (.09) with all settings on high. Previously there was some strange stuttering (in DX10) when I looked from the sub towards the factory and that is all gone with the new drivers. At the SP (Contact level) the difference is a little smaller maybe 2 or 3 frames in the average better but I never noticed the stuttering in SP with the .09 drivers anyway.

A few comparision screenshots with the 169.21 drivers at 1080p (no AA, no AF, no O/C)

Vista 64 - DX9 - 29.6fps - all settings on "high" (169.21)
http://img112.imageshack.us/img112/4...296ffi2.th.jpg

Vista 64 - DX10 - 29.7fps - all settings on "high" (169.21)
http://img444.imageshack.us/img444/4...297fwk1.th.jpg

Basically NO performance difference in Vista between DX9 and DX10 when all settings are on "high" inside the game!

XP32 - DX9 - 32.8fps - all settings on "high", no config (169.13) (notice the low-res mountains as proof)
http://img168.imagevenue.com/loc950/..._122_950lo.jpg
It's not a proper comparision since the drivers are 169.13, I will test the 169.21s in XP tomorrow.

XP32 - DX9 - 32.8fps - all settings on "high", disabled texture streaming (169.13) (notice the high-res mountains)
http://img189.imagevenue.com/loc97/t...9_122_97lo.jpg
No performance hit by adding "r_TexturesStreaming=0" to an empty system.cfg

*********

The "very high" battle

Vista 64 - DX10 - 18.2fps - all settings on "very high" inside the game (169.21)
http://img43.imagevenue.com/loc1007/...122_1007lo.jpg
Full motionblur (higher quality general blur + object blur), "very high" DoF

XP32 - DX9 - 23.9fps - custom "very high" config (Gaco 1.01) (169.13)
http://img129.imagevenue.com/loc642/..._122_642lo.jpg
The custom config has regular motion blur (no object blur, lower quality general blur) and regular DoF that doesn't add depth blur to the mountains in the distance and somewhat lower quality shadows (less blur compared to the "veryhigh" DX10 screenshot)

XP32 - DX9 - 21.8fps - custom "very high" config (Gaco 1.01) (169.13)
http://img124.imagevenue.com/loc737/..._122_737lo.jpg
Added object blur and the "veryhigh" DoF but I don't know how to add "very high" shadows and don't know if Gaco left out any settings that might be at the regular "veryhigh" ingame settings in DX10.

Edit: Added comparison of disabled texture streaming on XP32.

SH64 12-11-07 10:47 PM

Re: High settings 1920x1200 30fps?
 
Thanks for the report agentkay :cool:

MowTin 12-12-07 12:12 AM

Re: High settings 1920x1200 30fps?
 
Quote:

Originally Posted by agentkay
A few comparision screenshots with the 169.21 drivers at 1080p (no AA, no AF, no O/C)

Wow, Cryis at 1080p. I bet you got it up on the big screen. Lucky bastard :D


All times are GMT -5. The time now is 08:40 PM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.