nV News Forums

 
 

nV News Forums (http://www.nvnews.net/vbulletin/index.php)
-   Benchmarking And Overclocking (http://www.nvnews.net/vbulletin/forumdisplay.php?f=24)
-   -   MadShrimps, spreading vs non-spreading (line or dollop) (http://www.nvnews.net/vbulletin/showthread.php?t=104290)

andy_nv 12-14-07 11:48 AM

MadShrimps, spreading vs non-spreading (line or dollop)
 
Spreading it Thin TIM Roundup 2007

Unless those charts were reversed by mistake, results seem to favor non-spreading by an average load temp of 5C. I usually favored the spreading technique, too lazy right now to dismount the Ultra-120X and reapply paste. :D

methimpikehoses 12-14-07 02:07 PM

Re: MadShrimps, spreading vs non-spreading (line or dollop)
 
Quote:

Originally Posted by andy_nv
Spreading it Thin TIM Roundup 2007

Unless those charts were reversed by mistake, results seem to favor non-spreading by an average load temp of 5C. I usually favored the spreading technique, too lazy right now to dismount the Ultra-120X and reapply paste. :D

Interesting... I did the thin line on my cpu this time and it's working pretty well. (AS5)

Redeemed 12-14-07 02:17 PM

Re: MadShrimps, spreading vs non-spreading (line or dollop)
 
:wtf:

All I've ever done is just placed a little drop near the center, and then let the the pressure and wieght of the heatsink/fan do the rest.

grey_1 12-14-07 04:41 PM

Re: MadShrimps, spreading vs non-spreading (line or dollop)
 
Nice write up. The Tuniq paste looks good!


All times are GMT -5. The time now is 08:23 PM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.