nV News Forums

 
 

nV News Forums (http://www.nvnews.net/vbulletin/index.php)
-   General Hardware (http://www.nvnews.net/vbulletin/forumdisplay.php?f=2)
-   -   New Rig built and Heatsink question. (http://www.nvnews.net/vbulletin/showthread.php?t=107509)

Roliath 02-05-08 11:29 PM

New Rig built and Heatsink question.
 
Well my Opteron took a crap on me and I needed a Rig badly so I purchased a new board, cpu, ram, and case. (See "gaming rig" for details)
I haven't been following the Quads too closely besides the server counterparts I work with at work and I was able to get a G0 Q6600 and it clocked up to 3Ghz @ 1.38vCore keep in mind this is with 2GB Sticks (will have 8GB total once second set comes in). But I'm using the stock heatsink at the moment, I want to stay air and am willing to spend a decent amount to get the best cooling.

What is the best out right now?
Scythe? Zalman 9700cu?

Not too sure to be honest, temps are getting semi hot @ 62c full load and I want to keep them down as much as possible.

Also, anyone have tips on how to get a higher clock!? I'm new to Intel Overclocking but i'm sure i'll get it down with enough play time with this board.

Thanks again

EDIT: Ninja Edit, 3Ghz was my goal and i'm sure this CPU will clock higher with a better heatsink and possibly better ram if I choose to go that route (for my setup i'd rather go quantity over speed)

RaidenWoW 02-06-08 12:01 AM

Re: New Rig built and Heatsink question.
 
Zalman 9700 keeps my Q6600 overclocked 10% at 45-50 idle 55-59 full load.


that's with Arctic Silver 5. Don't use the included Zalman paste. I tried the zalman paste on my 360 and it immediately died a day after (Yeah I have the 3rlod error). I used Arctic Silver on my 360 a day later, and it hasn't died on me after HOURS of gameplay. There's VERY good thermal transfer with AC5.

Edit: I'd say 62 Celsius is pushing it.... might wanna underclock it a bit till you get a better cooler ;)

http://a507.ac-images.myspacecdn.com...461fd62d2a.jpg
http://a764.ac-images.myspacecdn.com...4f48831e8b.jpg

The fan behind it is 120mm. The Zalman sure is big.

XDanger 02-06-08 05:23 PM

Re: New Rig built and Heatsink question.
 
Thermalright Ultra 120 Extreme is the current choice for most with regards to extreme air cooling, Coupled with a 1600rpm Scythe S-FLEX 120mm Fan probably ,

Scythe Kaze Jyuni 1900RPM Slip Stream 120mm Fan looks interesting though (fan controller advised due to the loud).

look at the graph supplied by mullet http://www.nvnews.net/vbulletin/showthread.php?t=107340

Madpistol 02-06-08 06:03 PM

Re: New Rig built and Heatsink question.
 
Good luck finding a Thermalright Ultra 120 Extreme. I can't seem to find them in stock anywhere. :(

Bearclaw 02-06-08 06:13 PM

Re: New Rig built and Heatsink question.
 
Get one of the zalman 9700 that are black.

Sexy.

Roliath 02-06-08 06:53 PM

Re: New Rig built and Heatsink question.
 
I found a site, albeit a little bit more expensive that has the Ultra Extreme in stock, I'm gonna pick one of those up here in a few days.

I'm still testing but I was able to boot and play Crysis with 3Ghz 1:1 ram at stock vCore. I'm having a few issues with Crysis as it crashes at stock speeds and overclocked, i'm thinking its the beta drivers i'm running.

Load after playing Crysis was 55c which is much better, this is still using the stock cooler too.

XDanger 02-07-08 08:09 PM

Re: New Rig built and Heatsink question.
 
I get 44c during Crysis but I dont know if thats good or not
e6400 @ 3.51ghz, 1.37v , Hope I can get a couple lower with MX-2

hokeyplyr48 02-07-08 09:17 PM

Re: New Rig built and Heatsink question.
 
this is where i got mine from. and it is by far the best air cooler out there.
http://www.sidewindercomputers.com/thulex.html

3.5ghz in the 40's

Wolfhound 02-08-08 06:30 AM

Re: New Rig built and Heatsink question.
 
Thermalright 120 Ultra Extreme and some 1600rpm fan

Roliath 02-09-08 02:20 PM

Re: New Rig built and Heatsink question.
 
Quote:

Originally Posted by hokeyplyr48
this is where i got mine from. and it is by far the best air cooler out there.
http://www.sidewindercomputers.com/thulex.html

3.5ghz in the 40's

Thanks man, Just ordered.

john19055 02-10-08 11:55 PM

Re: New Rig built and Heatsink question.
 
I have the Thermalright Ultra 120 Extreme on my Q6600 and it works great I have a Silverstone ajustable fan on mine ,but it is tall so make sure it will fit in your case.I run my at 3.3gig at 1.35v ,but I have the B3 model and it gets to around 58c running Prime95 on the torture test,but that is good for a B3 model,the GO runs cooler.


All times are GMT -5. The time now is 12:17 AM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.