nV News Forums

 
 

nV News Forums (http://www.nvnews.net/vbulletin/index.php)
-   NVIDIA Linux (http://www.nvnews.net/vbulletin/forumdisplay.php?f=14)
-   -   Solved flipping Dualhead problem also ? (http://www.nvnews.net/vbulletin/showthread.php?t=10787)

mfred 04-25-03 02:43 PM

Solved flipping Dualhead problem also ?
 
Bevore I am going to install a new driver I want to know if this problem has been solved - Monitor outputs changed (analog-dvi) dvi was master analog was secondary monitor...

mfred 04-28-03 03:26 PM

come on

I bug-reported it, it was a known issue

Is it solved or not ?

dkosovic 04-28-03 10:02 PM

I don't think it has been solved with 1.0-4363, as I'm still getting the following in the verbose log:
Code:

...
(--) NVIDIA(0): Found 2 CRTCs on board
(II) NVIDIA(0): Supported display device(s): CRT-0, CRT-1, DFP-0, DFP-1
(II) NVIDIA(0): Boot display device(s): CRT-1
(II) NVIDIA(0): NVIDIA GPU detected as: Quadro4 900 XGL
...
(II) NVIDIA(0): Mapping display device 0 (CRT-0) to CRTC 1
...
(II) NVIDIA(1): Mapping display device 1 (CRT-1) to CRTC 0
...

Ideally, I would like to be able to force the mapping of CRT-0 to CRTC 0 and CRT-1 to CRTC 1. Like with the following XFree86 4.3.0 "nv" driver option:
Quote:

Option "CrtcNumber" "integer"

nForce2, Quadro4, GeForce4 and NV30 may have two video outputs. The driver attempts to autodetect which one the monitor is connected to. In the case that autodetection picks the wrong one, this option may be used to force usage of a particular output. The options are "0" or "1". Default: autodetected.
Doug.


All times are GMT -5. The time now is 05:05 AM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.