nV News Forums

 
 

nV News Forums (http://www.nvnews.net/vbulletin/index.php)
-   Benchmarking And Overclocking (http://www.nvnews.net/vbulletin/forumdisplay.php?f=24)
-   -   Help me push my system a little more (http://www.nvnews.net/vbulletin/showthread.php?t=111386)

tjohn 04-09-08 11:00 AM

Help me push my system a little more
 
Ok, I'm fine bumping the Q6600 up to 333 fsb and ram up to 1002, every else on auto. I bump the fsb to 345 it auto clocks the ram to 1032 and that runs stable. Once I go 355 fsb the ram goes to like 1064 and no post. I clock the ram down to the next lowest whatever that was and post but not stable. Noob question but, what do I need to do? Volts are all on auto.

XDanger 04-09-08 03:48 PM

Re: Help me push my system a little more
 
auto might be bad ,set all the correct numbers whatever they may be ,Probably needs more Voltage all over the shop.

Find someone with your specs and a decent oc and set the voltages a bit lower than them to test if you want a risky shortcut.

Is this p5e3 deluxe article relevant to the P5E's bios ,It looks nice.

tjohn 04-09-08 08:15 PM

Re: Help me push my system a little more
 
Thanks butt I'm still confused :(

xmichaeluk 04-11-08 03:29 AM

Re: Help me push my system a little more
 
It's pretty much a trial and improvement process, bump up the vcore voltage a little bit at a time and check if your PC is stable. I would either use Everest stability test or Prime95 to test your cpu.


All times are GMT -5. The time now is 06:58 AM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.