nV News Forums


nV News Forums (http://www.nvnews.net/vbulletin/index.php)
-   NVIDIA Linux (http://www.nvnews.net/vbulletin/forumdisplay.php?f=14)
-   -   the new NVIDIA-Linux-x86-1.0-4363.run doesn't work for Gforce2 MX400 (http://www.nvnews.net/vbulletin/showthread.php?t=11209)

yangyangyyy 05-03-03 04:16 PM

the new NVIDIA-Linux-x86-1.0-4363.run doesn't work for Gforce2 MX400
1 Attachment(s)
I downloaded the package, installed by running the xxx.run , then restarted X , then it was all wild characters, not X screen ,

here is my XFree86.0.log ,
I replace the faulty XF86Config , sorry I couldn't post it here, but it was just using

Driver nvidia
in the device section, no dri stuff

bwkaz 05-03-03 04:54 PM

I don't know if this has anything to do with it or not, but you're loading the wrong libglx file (the X module). It should be using /usr/X11R6/lib/modules/extensions/libglx.so, but it's using the libglx.a file in that directory instead.

Try moving the libglx.a file to somewhere else (or to just a different name in the same directory).

Andy Mecham 05-04-03 12:03 AM

Are you sure you ran the installer correctly? If you still have a libglx.a sitting around, I would expect that the installer failed when you ran it.


yangyangyyy 05-04-03 02:15 AM

1 Attachment(s)
yes, Installer installed correctly, this time I tried again, and I checked there's no libglx.a file around, and I commented out the
Load glx line in Config,

still same problem

here's the new XFree86.0.log


All times are GMT -5. The time now is 01:38 AM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.