Slackware 9 and NForce 2
I have an A7N8X-DLX board and I am running Slackware 9 with a 2.4.20 kernel.
I have followed all the instrctions in the NForce driver installation instructions but when I use "modprobe nvaudio" I get the following : (modprobe -a produces the same output)
Here is the output of depmod -a :
Also, I am right in thinking that there is no way to get all sound converted to dolby digital under Linux? Are there any parameters/switches that can be passed to the nVidia audio module?
I forgot to mention this :
I first did a make install from a mounted vfat partition and proceded with the required modprobes. After doing this, my sound worked fine but I was still getting the errors mentionned above.
I then did make uninstall thinking that the vfat mounted partition might have screwed up something.
After that, I extracted the tar file on my ext2 linux partition and redid make install. This is where I am now and getting the errors above.
rebuild your Kernel (preferably 2.4.21-rc2, because of the 3com NIC and the (now working) AGPgart) and include a sound-module for "Intel ICH (i8xx), SiS 7012, NVidia nForce Audio or AMD 768/811x".
after booting the new kernel compile the nvaudio and nvnet modules and use "sound-slot-0" as an alias for your nvaudio-module (/etc/modules.conf).
|All times are GMT -5. The time now is 02:53 PM.|
Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2014, nV News.