Missing kernel-headers in RH9
I have been working through the problems on my nforce2 motherboard and I am slowly getting somewhere.
Next on my list is getting the full speed from my hard drive.
According to all info on inet I need to patch and recompile the kernel. Ok, for a newbie that's fairly scary but there is plenty of info around.
Unfortunately everything I read about this process requires that I have the kernel-headers installed.
I have checked rpms on the system and on the 3 RH9 cds and they don't seem to be there. I have done a 'find' with no luck.
Am I looking in the wrong place or are they missing?
I am running RH9 2.4.20-8.
If using the latest NForce drivers (v256) I believe, NVidia reports that the ide, usb, modem drivers are included with redhat 9.0 and not in the latest driver release.
I have also seen on some posts that you need to set some parameters up for the drives to get ata mode out of them
The Redhat kernel headers are in a package named:
kernel-source-<version stuff here>.rpm
I've got them now.
They seem to have been installed but there was no trace of a kernel-headers rpm.
I went on to try and patch the kernel and I get lots of failed messages and do I want to reverse the patch?
It seems that the 2.4.20-8 kernel that RH9 provides is a mixture of 2.4.20 and 2.4.21.
I am going to put up another post re kernel versions etc.
|All times are GMT -5. The time now is 06:46 PM.|
Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2014, nV News.