mandrake linux 9.1 and 1.0-4349
First of all, sorry for my english, because it's very bad.........
I have a creative GForce2 MX 200 with a PIII 1000 runing on a Mandreake 9.1 and I have a problem with the 1.0-4349 released drivers. Once installed, the xserver doesn't start, and have this error in /var/log/messages:
 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(--) NVIDIA(0): Linear framebuffer at 0xD0000000
(--) NVIDIA(0): MMIO registers at 0xDC000000
(EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module!
(EE) NVIDIA(0): *** Aborting ***
(II) UnloadModule: "nvidia"
(II) UnloadModule: "vgahw"
(II) Unloading /usr/X11R6/lib/modules/libvgahw.a
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
Some one have a idea? Then if I do 'lsmod' , I see that the nvidia module haven't been loaded.
I atached my XF86config-4
so load it. add "nvidia" line in your /ect/modules.
or manually "modprobe nvidia" if you have it compiled
when the linux is loaded, but de x doesn't start, I tape lsmod, and I see that the module isn't loaded, then I load the module with 'modprobe nvidia' then I tape 'lsmod' and I see that the module is loaded, then I tape 'startx' with the vervose option and the x server doesn't start. It show this error:
(EE) [GLX]: Failed to add GLX extension (NVIDIA XFree86 driver not found)
Some one knows why?
post the whole xfree86.0.log file...
here are my log.......
And now? Some one has a idea??
d00d your using the default drivers...change the driver in the xf86config-4 file to nvidia and then post the xfree86.0.log file
here are my log for the nvidia module :P
Sorry, but I have a lot of logs..............
Here the good log.
I had a similar problem on Mandrake 9.1.
It turned out that I needed to do this in my BIOS:
PNP OS <-- set to NO
Assign IRQ for VGA <-- set to yes
Then it worked fine :D
|All times are GMT -5. The time now is 02:25 PM.|
Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2014, nV News.