nV News Forums


nV News Forums (http://www.nvnews.net/vbulletin/index.php)
-   Benchmarking And Overclocking (http://www.nvnews.net/vbulletin/forumdisplay.php?f=24)
-   -   p5b-d Pencil mod questions (http://www.nvnews.net/vbulletin/showthread.php?t=127844)

XDanger 02-09-09 10:36 AM

p5b-d Pencil mod questions
Running q6700 @ 3.6 but with lots of vdroop so thinking of doing pencil mod.

2b pencil is better as is less loose than a higher b pencil and wont blow off so quickly?

Can I put some silicone gaulk on there to keep the graphite fresh or will it migrate into the silicone?

edit: k so it doesnt "fall off" but the charge degrades the structure of the graphite, I see.

XDanger 02-11-09 12:56 PM

Re: p5b-d Pencil mod questions
Ive tried a couple of time but with fail, I keep getting zero vdroop which is bad

The cpu load temp is 8 degree's lower though ,Even with warmer ambient temp.

Could be because the case is on its side but still good.

K heres another question,

Just HOW dangerous is no vdroop?

bail_w 02-12-09 02:02 AM

Re: p5b-d Pencil mod questions
I don't get it. At first, you said there was vdroop and now zero vdroop? Why do you think zero vdroop is bad?

XDanger 02-12-09 08:08 AM

Re: p5b-d Pencil mod questions
AFAIK a little vdroop helps protect against cpu explode.
After about 10 redo's my ripple has gone from 0.06 to 0.02 ,Which is good I think.

All times are GMT -5. The time now is 10:25 PM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.