nV News Forums

 
 

nV News Forums (http://www.nvnews.net/vbulletin/index.php)
-   NVIDIA Linux (http://www.nvnews.net/vbulletin/forumdisplay.php?f=14)
-   -   Can't set correct resolution (http://www.nvnews.net/vbulletin/showthread.php?t=131322)

knumar 04-09-09 01:31 PM

Can't set correct resolution
 
My problem is that NVIDA is not accepting the resolution of my screen. I try to get 1360x768_60.00, but NVIDA sets it autumatically to 640x480_50. I have dual boot on my pc, and the resolution gets correct under microsoft XP.

My monitor is a Fujitsu-Siemens LCD-TV. 40inch
This is my graphics card controller: VGA compatible controller: nVidia Corporation NV37GL [Quadro PCI-E Series] (rev a2). Driver version of NVIDIA is 173.14.12

My OS is ubuntu 8.10 intreprid

Here is part of my xorg log file:
(II) NVIDIA(0): Assigned Display Device: CRT-1
(WW) NVIDIA(0): No valid modes for "1360x768_60.00"; removing.
(WW) NVIDIA(0):
(WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode
(WW) NVIDIA(0): "nvidia-auto-select".
(WW) NVIDIA(0):
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 640 x 480
(WW) NVIDIA(0): Unable to get display device CRT-1's EDID; cannot compute DPI
(WW) NVIDIA(0): from CRT-1's EDID.
(==) NVIDIA(0): DPI set to (75, 75); computed from built-in default

And here is my xorg.conf:
Section "Monitor"
Identifier "Monitor0"
VendorName "Fujitsu Siemens LCD"
ModelName "CRT-1"
Modeline "1360x768_60.00" 84.72 1360 1424 1568 1776 768 769 772 795 -HSync +Vsync
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0

EndSection


Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
SubSection "Display"
Depth 24
Modes "1360x768_60.00"
EndSubSection
EndSection

Section "Device"
Identifier "Configured Video Device"
Option "NoLogo" "True"
Driver "nvidia"
EndSection

Section "Device"
Identifier "Device0"
VendorName "NVIDIA Corporation"
BoardName "Quadro NVS 280 PCI-E"
Driver "nvidia"
EndSection

ManfredP 04-10-09 03:35 AM

Re: Can't set correct resolution
 
Hello,
I got inside the quote to mark what I found. It is a really small error!

Quote:

Originally Posted by knumar (Post 1979571)
My problem is that NVIDA is not accepting the resolution of my screen. I try to get 1360x768_60.00, but NVIDA sets it autumatically to 640x480_50. I have dual boot on my pc, and the resolution gets correct under microsoft XP.

My monitor is a Fujitsu-Siemens LCD-TV. 40inch
This is my graphics card controller: VGA compatible controller: nVidia Corporation NV37GL [Quadro PCI-E Series] (rev a2). Driver version of NVIDIA is 173.14.12

My OS is ubuntu 8.10 intreprid

Here is part of my xorg log file:
(II) NVIDIA(0): Assigned Display Device: CRT-1
(WW) NVIDIA(0): No valid modes for "1360x768_60.00"; removing.
(WW) NVIDIA(0):
(WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode
(WW) NVIDIA(0): "nvidia-auto-select".
(WW) NVIDIA(0):
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 640 x 480
(WW) NVIDIA(0): Unable to get display device CRT-1's EDID; cannot compute DPI
(WW) NVIDIA(0): from CRT-1's EDID.
(==) NVIDIA(0): DPI set to (75, 75); computed from built-in default

And here is my xorg.conf:
Section "Monitor"
Identifier "Monitor0"

That's the Name of this section!
Quote:

VendorName "Fujitsu Siemens LCD"
ModelName "CRT-1"
Modeline "1360x768_60.00" 84.72 1360 1424 1568 1776 768 769 772 795 -HSync +Vsync
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0

EndSection


Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
... and now see which name you use here ...That's not the same so it can't work
Quote:

Device "Configured Video Device"
SubSection "Display"
Depth 24
Modes "1360x768_60.00"
EndSubSection
EndSection

Section "Device"
Identifier "Configured Video Device"
Option "NoLogo" "True"
Driver "nvidia"
EndSection

Section "Device"
Identifier "Device0"
VendorName "NVIDIA Corporation"
BoardName "Quadro NVS 280 PCI-E"
Driver "nvidia"
EndSection
The solution is quiet simple: copy the name of the section into the reference or vice versa (it doesn't matter which line you change of course). Have you taken parts of the automatic configured file through installation and parts from files out of older installations and put them together (just asked for curiosity)?

greetings

Manfred


All times are GMT -5. The time now is 09:01 PM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.