nV News Forums

 
 

nV News Forums (http://www.nvnews.net/vbulletin/index.php)
-   NVIDIA Linux (http://www.nvnews.net/vbulletin/forumdisplay.php?f=14)
-   -   Over-clocking the DVI outputs? (http://www.nvnews.net/vbulletin/showthread.php?t=131495)

JaXXoN 04-14-09 05:19 AM

Over-clocking the DVI outputs?
 
Hi all!

I'm wondering if it is possible to slightly over clock the DVI outputs?
Five percent would be sufficient for me!

Background: i'm using a Matrox TripleHead2Go video splitter that
splits the signal of a DualLink DVI output in order to supply three
1680x1050 LCDs. However, because of the specified maximum
bandwidth for DL DVI of 330 MHz, the frame rate is "only" 57 Hz.
I actually didn't yet recognized any problems with this setup, so far,
but i could imagine that the video card, the splitter box and the displays
might very well stand a five percent higher pixel clock rate, resulting
in a more common 60 Hz frame rate.

Any comments?

regards

Bernhard


All times are GMT -5. The time now is 09:12 PM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.