nV News Forums

 
 

nV News Forums (http://www.nvnews.net/vbulletin/index.php)
-   NVIDIA Linux (http://www.nvnews.net/vbulletin/forumdisplay.php?f=14)
-   -   External screen not working with DELL docking station (http://www.nvnews.net/vbulletin/showthread.php?t=152325)

MaxMtp 06-24-10 03:31 AM

External screen not working with DELL docking station
 
Hi,

I have a laptop DELL E6500 running Ubuntu 10.04, with a video card NVIDIA Quadro NVS160M. At work the laptop is attached to a docking station, and to the docking station an external DELL alienware 23" is connected using DVI port.
Until last week I was able to plug my laptop to my docking station and work with my extenal screen. One week ago I accepted the update of video drivers and since that I am not anymore able to use my external monitor.
I can see the bios screen and after that the command line on the external screen, but once the graphic card set up the external screen switch on economy mode and I should open my laptop to see login screen.
I have installed the latest version of NVIDIA drivers (NVIDIA-Linux-x86-195.36.31-pkg1.run) but it wasn't able to help me to solve my problem. I also tried this solution:http://www.ubuntugeek.com/howto-inst...ucid-lynx.html but this didn't helped me.

I copy here my xorg.conf (CRT-0 is because I have an external screen at home)

Code:

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildmeister@builder75)  Wed Jun  2 00:21:51 PDT 2010

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder75)  Wed Jun  2 00:20:35 PDT 2010

Section "ServerLayout"
    Identifier    "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option        "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "Module"
    load    "glx"
EndSection

Section "InputDevice"

    # generated from default
    Identifier    "Mouse0"
    Driver        "mouse"
    Option        "Protocol" "auto"
    Option        "Device" "/dev/psaux"
    Option        "Emulate3Buttons" "no"
    Option        "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier    "Keyboard0"
    Driver        "kbd"
EndSection

Section "Monitor"
    Identifier    "Monitor0"
    VendorName    "Unknown"
    ModelName      "LPL"
    HorizSync      32.0 - 48.0
    VertRefresh    40.0 - 60.0
    Option        "DPMS"
EndSection

Section "Device"
    Identifier    "Device0"
    Driver        "nvidia"
    VendorName    "NVIDIA Corporation"
    BoardName      "Quadro NVS 160M"
EndSection

Section "Screen"
    Identifier    "Screen0"
    Device        "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option        "UseDisplayDevice" "DFP-0, DFP-2, CRT-0"
    Option        "MetaModes" "DFP-0: 1280x800_60 +0+0, DFP-2: 1920x1080_120 +0+0; DFP-0: 1280x800_60 +0+0, CRT-0: 720x400_60 +0+0"
    Option        "TwinView" "1"
    SubSection    "Display"
        Depth      24
    EndSubSection
EndSection

I copy here after my Xorg.0.log

Code:

X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-27-server i686 Ubuntu
Current Operating System: Linux dilbert 2.6.32-22-generic-pae #36-Ubuntu SMP Thu Jun 3 23:14:23 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic-pae root=UUID=dbb25523-8ceb-4a51-a8af-f8089dadef93 ro nomodeset
Build Date: 09 June 2010  10:55:28AM
xorg-server 2:1.7.6-2ubuntu7.1 (For technical support please see http://www.ubuntu.com/support)
Current version of pixman: 0.16.4
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 22 09:08:29 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/usr/lib/X11/xorg.conf.d"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) |  |-->Monitor "Monitor0"
(**) |  |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "Xinerama" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
    Entry deleted from font path.
(==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
    built-ins
(==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loader magic: 0x81f0e80
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 6.0
    X.Org XInput driver : 7.0
    X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:1:0:0) 10de:06eb:1028:024f nVidia Corporation G98M [Quadro NVS 160M] rev 161, Mem @ 0xf5000000/16777216, 0xe0000000/268435456, 0xf2000000/33554432, I/O @ 0x0000df00/128, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Server Extension
(II) NVIDIA GLX Module  195.36.31  Tue Jun  1 23:22:44 PDT 2010
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver  195.36.31  Tue Jun  1 22:21:58 PDT 2010
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "TwinView" "1"
(**) NVIDIA(0): Option "MetaModes" "DFP-0: 1280x800_60 +0+0, DFP-2: 1920x1080_120 +0+0; DFP-0: 1280x800_60 +0+0, CRT-0: 720x400_60 +0+0"
(**) NVIDIA(0): Option "UseDisplayDevice" "DFP-0, DFP-2, CRT-0"
(**) Jun 22 09:08:33 NVIDIA(0): Enabling RENDER acceleration
(II) Jun 22 09:08:33 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) Jun 22 09:08:33 NVIDIA(0):    enabled.
(II) Jun 22 09:08:35 NVIDIA(GPU-0): Display (Dell Alienware2310 (DFP-2)) supports NVIDIA 3D Vision
(II) Jun 22 09:08:35 NVIDIA(GPU-0):    stereo.
(II) Jun 22 09:08:35 NVIDIA(0): NVIDIA GPU Quadro NVS 160M (G98) at PCI:1:0:0 (GPU-0)
(--) Jun 22 09:08:35 NVIDIA(0): Memory: 524288 kBytes
(--) Jun 22 09:08:35 NVIDIA(0): VideoBIOS: 62.98.3c.00.04
(II) Jun 22 09:08:35 NVIDIA(0): Detected PCI Express Link width: 16X
(--) Jun 22 09:08:35 NVIDIA(0): Interlaced video modes are supported on this GPU
(--) Jun 22 09:08:35 NVIDIA(0): Connected display device(s) on Quadro NVS 160M at PCI:1:0:0:
(--) Jun 22 09:08:35 NVIDIA(0):    LPL (DFP-0)
(--) Jun 22 09:08:35 NVIDIA(0):    Dell Alienware2310 (DFP-2)
(--) Jun 22 09:08:35 NVIDIA(0): LPL (DFP-0): 330.0 MHz maximum pixel clock
(--) Jun 22 09:08:35 NVIDIA(0): LPL (DFP-0): Internal Dual Link LVDS
(--) Jun 22 09:08:35 NVIDIA(0): Dell Alienware2310 (DFP-2): 165.0 MHz maximum pixel clock
(--) Jun 22 09:08:35 NVIDIA(0): Dell Alienware2310 (DFP-2): Internal Single Link TMDS
(**) Jun 22 09:08:35 NVIDIA(0): TwinView enabled
(WW) Jun 22 09:08:35 NVIDIA(0): Requested display device "CRT-0" not available; only the
(WW) Jun 22 09:08:35 NVIDIA(0):    display devices "DFP-0, DFP-2" will be used.
(II) Jun 22 09:08:35 NVIDIA(0): Assigned Display Devices: DFP-0, DFP-2
(II) Jun 22 09:08:35 NVIDIA(0): Validated modes:
(II) Jun 22 09:08:35 NVIDIA(0):    "DFP-0:1280x800_60+0+0,DFP-2:1920x1080_120+0+0"
(II) Jun 22 09:08:35 NVIDIA(0):    "DFP-0:1280x800_60+0+0,CRT-0:720x400_60+0+0"
(II) Jun 22 09:08:35 NVIDIA(0): Virtual screen size determined to be 1280 x 800
(--) Jun 22 09:08:35 NVIDIA(0): DPI set to (98, 96); computed from "UseEdidDpi" X config
(--) Jun 22 09:08:35 NVIDIA(0):    option
(==) Jun 22 09:08:35 NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) Jun 22 09:08:35 NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
(II) Jun 22 09:08:35 NVIDIA(0): Initialized GPU GART.
(II) Jun 22 09:08:35 NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) Jun 22 09:08:35 NVIDIA(0):    enough to receive ACPI hotkey events.
(II) Jun 22 09:08:35 NVIDIA(0): ACPI brightness change hotkey events enabled.
(II) Jun 22 09:08:35 NVIDIA(0): Setting mode "DFP-0:1280x800_60+0+0,DFP-2:1920x1080_120+0+0"
(II) Loading extension NV-GLX
(II) Jun 22 09:08:34 NVIDIA(0): Initialized OpenGL Acceleration
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) Jun 22 09:08:34 NVIDIA(0): Initialized X Rendering Acceleration
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
(II) config/udev: Adding input device Video Bus (/dev/input/event7)
(**) Video Bus: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 2.3.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 7.0
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event7"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) XKB: reuse xkmfile /var/lib/xkb/server-024B27377A00C087BE90D9AAC040ECC4DA83644C.xkm
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device Lid Switch (/dev/input/event0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Sleep Button (/dev/input/event2)
(**) Sleep Button: Applying InputClass "evdev keyboard catchall"
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event2"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device HID 413c:8157 (/dev/input/event6)
(**) HID 413c:8157: Applying InputClass "evdev keyboard catchall"
(**) HID 413c:8157: always reports core events
(**) HID 413c:8157: Device: "/dev/input/event6"
(II) HID 413c:8157: Found keys
(II) HID 413c:8157: Configuring as keyboard
(II) XINPUT: Adding extended input device "HID 413c:8157" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device Dell Dell USB Keyboard (/dev/input/event5)
(**) Dell Dell USB Keyboard: Applying InputClass "evdev keyboard catchall"
(**) Dell Dell USB Keyboard: always reports core events
(**) Dell Dell USB Keyboard: Device: "/dev/input/event5"
(II) Dell Dell USB Keyboard: Found keys
(II) Dell Dell USB Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Dell Dell USB Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HDA Intel Mic at Sep Left Jack (/dev/input/event12)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HDA Intel Mic at Ext Right Jack (/dev/input/event13)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HDA Intel Line Out at Sep Left Jack (/dev/input/event14)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HDA Intel HP Out at Ext Right Jack (/dev/input/event15)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/event9)
(**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "evdev pointer catchall"
(**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "evdev touchpad catchall"
(**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "touchpad catchall"
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.2.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.2
(**) Option "Device" "/dev/input/event9"
(II) AlpsPS/2 ALPS DualPoint TouchPad: x-axis range 0 - 1023
(II) AlpsPS/2 ALPS DualPoint TouchPad: y-axis range 0 - 767
(II) AlpsPS/2 ALPS DualPoint TouchPad: pressure range 0 - 127
(II) AlpsPS/2 ALPS DualPoint TouchPad: finger width range 0 - 0
(II) AlpsPS/2 ALPS DualPoint TouchPad: buttons: left right middle
(--) AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
(**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
(II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD)
(**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) keeping acceleration scheme 1
(**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration profile 0
(**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration factor: 2.000
(**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration threshold: 4
(--) AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
(II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/mouse2)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device DualPoint Stick (/dev/input/event8)
(**) DualPoint Stick: Applying InputClass "evdev pointer catchall"
(**) DualPoint Stick: always reports core events
(**) DualPoint Stick: Device: "/dev/input/event8"
(II) DualPoint Stick: Found 3 mouse buttons
(II) DualPoint Stick: Found relative axes
(II) DualPoint Stick: Found x and y relative axes
(II) DualPoint Stick: Configuring as mouse
(**) DualPoint Stick: YAxisMapping: buttons 4 and 5
(**) DualPoint Stick: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "DualPoint Stick" (type: MOUSE)
(II) DualPoint Stick: initialized for relative axes.
(II) config/udev: Adding input device DualPoint Stick (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event10)
(**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
(**) Dell WMI hotkeys: always reports core events
(**) Dell WMI hotkeys: Device: "/dev/input/event10"
(II) Dell WMI hotkeys: Found keys
(II) Dell WMI hotkeys: Configuring as keyboard
(II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event3)
(**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall"
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event3"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse3)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device USB Optical Mouse (/dev/input/event16)
(**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
(**) USB Optical Mouse: always reports core events
(**) USB Optical Mouse: Device: "/dev/input/event16"
(II) USB Optical Mouse: Found 3 mouse buttons
(II) USB Optical Mouse: Found scroll wheel(s)
(II) USB Optical Mouse: Found relative axes
(II) USB Optical Mouse: Found x and y relative axes
(II) USB Optical Mouse: Found absolute axes
(II) USB Optical Mouse: Configuring as mouse
(**) USB Optical Mouse: YAxisMapping: buttons 4 and 5
(**) USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE)
(II) USB Optical Mouse: initialized for relative axes.
(WW) USB Optical Mouse: ignoring absolute axes.

The nvidia-settings apps is not able to give me the possibility to select a definition upper than 640X480 for my external 23" screen!! What is the solution to work again with my external screen without opening the laptop?

Thanks, Max


All times are GMT -5. The time now is 08:46 PM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.