Widescreen stuck at 640x480 with driver 195.36.31
I have a ViewSonic VX2235 which has a native resolution of 1680x1050, and a GeForce 9500 GT. I use DVI with this monitor. I use Arch Linux. It has worked fine for a long time until last week when I updated the system (which included xorg 1.8.1). Now this screen will not go above 640x480. I also have a ViewSonic VA720 connected via a DVI to VGA adapter. It has ha native resolution of 1280x1024. It has not been affected by this issue.
This problem appears similar to the one in: http://www.nvnews.net/vbulletin/showthread.php?t=152325 where the poster has a problem with a 23" dell screen attached to his laptop and http://www.nvnews.net/vbulletin/showthread.php?t=152221 where the problem is an LG tv. Also I found this about a Zalman ZM-M220W which has the same navtive resolution as mine, http://www.nvnews.net/vbulletin/showthread.php?t=152042 .
The last posts suggests I try altering my modeline, which I will try after trying to upgrade to the latest 256.35 version. I have tried various modifications to the xorg.conf file, including disabling TwinView (and enabling) and providing a mode in the "display" section of the "screen" section, without success. Regardless this is definatlly a regresion and I hope it will be fixed in the latest version.
I have attached two nvidia bug reports the new one should be the results with twinview disabled and the old the one with it enabled. I hope any other people have this issue can find usefull information in this post or add any further solutions they may have.
[Solved] Widescreen stuck at 640x480 with driver 195.36.31
Okay this was actually eaiser to fix than I expected a simple upgrade to 256.35 (still in arch testing as of today) put every thing back to the way it was supposed to be. :)
|All times are GMT -5. The time now is 10:53 AM.|
Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2014, nV News.