nV News Forums

 
 

nV News Forums (http://www.nvnews.net/vbulletin/index.php)
-   NVIDIA Linux (http://www.nvnews.net/vbulletin/forumdisplay.php?f=14)
-   -   How to start clone mode when X is initialized (http://www.nvnews.net/vbulletin/showthread.php?t=152376)

ugtar 06-25-10 11:55 AM

How to start clone mode when X is initialized
 
Hey all, it seems like there should be a simple way to do this but I don't know how. I have a theater set up with a linux box. The box has two video cards, the first is connected to a muxer which drives a display in the control room, and the second drives the operator's display in the theater, as well as the projector.

The issue is, right now the operator has to go run up to the control room to log in (because gdm only appears on display 0). What she does now is after logging in, her nvidia settings are set up for clone mode, so after she's logged in she has the same display in the control room, at the operator's display, and on the projector.

Basically, what I don't know how to do is start up clone mode *before* she logs in, so that gdm appears using clone mode on all the diplays.

It seems like I should be able to drop some command into the /etc/gdm/PreSession/Default script to start up nvidia's clone mode. Is there a nvidia-settings, or other command that can start clone mode there?

Thanks!

Uri

AaronP 06-25-10 12:58 PM

Re: How to start clone mode when X is initialized
 
You should be able to add these options to xorg.conf:
Code:

Option "TwinView"
Option "TwinViewOrientation" "Clone"

See Chapter 13 of the README for more detail on configuring multiple displays in xorg.conf.


All times are GMT -5. The time now is 01:35 AM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.