nV News Forums


nV News Forums (http://www.nvnews.net/vbulletin/index.php)
-   NVIDIA Linux (http://www.nvnews.net/vbulletin/forumdisplay.php?f=14)
-   -   direct rendering: No (http://www.nvnews.net/vbulletin/showthread.php?t=166102)

migelito 09-09-11 10:18 AM

direct rendering: No
3 Attachment(s)
I have hp mini 311-1100 with ion on board, under slackware 13.1:
02:00.0 VGA compatible controller: nVidia Corporation ION VGA [GeForce 9400M] (rev b1)
Some time ago i install nvidia drivers, and all look good. But after i change some kernel version and now i cant get direct rendering, all time i get -
direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose)
i try kernel version:
and nvidia drivers version:
same result.
Tryed pci=nommconf, no effect.
For all kernel, all drivers compiled without error in process, but in log i find -
test -e include/generated/autoconf.h -a -e include/config/auto.conf || ( \
echo; \
echo " ERROR: Kernel configuration is invalid."; \
echo " include/generated/autoconf.h or include/config/auto.conf are
echo " Run 'make oldconfig && make prepare' on kernel src to fix it.
"; \
echo; \

I can start X and no any trouble in use, but no direct rendering.
I try all solution what i find in internet - no result. All look good, but no work.
glxinfo | grep version
server glx version string: 1.4
client glx version string: 1.4
GLX version: 1.4
OpenGL version string: 2.1.2 NVIDIA 285.03
OpenGL shading language version string: (null)

If any one know whats happening, plz, let me know.

In attache: nvidia-installer.log, LIBGL_DEBUG=verbose glxinfo, xorg.conf

drhirsch 09-10-11 03:54 AM

Re: direct rendering: No
Did you try what was suggested in the error message, running 'make oldconfig && make prepare' in your kernel source tree?

DeiF 09-10-11 05:05 AM

Re: direct rendering: No
If that happened to me in OpenSUSE it would mean that I forgot to add "--kernel-output-path=/usr/src/linux-obj/x86_64/desktop" after the "sh NVIDIA-Linux-x86_64-280.13.run" command.

migelito 09-10-11 07:16 AM

Re: direct rendering: No
`make oldconfig' will attempt to configure the kernel from an old configuration file; it will run through the `make config' process for you. If you haven't ever compiled a kernel before or don't have an old config file, then you probably shouldn't do this, as you will most likely want to change the default configuration.
But - yes, ill try it. No result.
And 3 min ago ill try --kernel-output-path= option, same result.

migelito 09-13-11 03:47 AM

Re: direct rendering: No
Hello again. How i can receive consultation of the developers?

All times are GMT -5. The time now is 01:25 AM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.