nV News Forums

 
 

nV News Forums (http://www.nvnews.net/vbulletin/index.php)
-   NVIDIA Linux (http://www.nvnews.net/vbulletin/forumdisplay.php?f=14)
-   -   Configuring multiple x screens on one card (http://www.nvnews.net/vbulletin/showthread.php?t=16780)

tidixon 08-21-03 11:34 AM

Configuring multiple x screens on one card
 
1 Attachment(s)
I have a Geforce 4 MX 440 PCI dual vga out
and a Geforce 4 ti4200 AGP.

I currently have twinview enabled on the mx440, and everything is working good, but I don't want to use twin view anymore. I want the two display heads to be independent. When I followed the readme appendix R directions I got all kinds of error messages. Here is my config file:

eof 08-22-03 08:46 AM

my xfree config for multiple x screens
 
Hello,

I don't understand what you have in your "SeverLayout" section. :confused:

I have it working, so here is my XF86Config-4 file :

# File generated by XFdrake.

# ************************************************** ********************
# Refer to the XF86Config man page for details about the format of
# this file.
# ************************************************** ********************

Section "Files"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection

Section "ServerFlags"
#DontZap # disable <Crtl><Alt><BS> (server abort)
#DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
AllowMouseOpenFail # allows the server to start up even if the mouse doesn't work
EndSection

Section "Module"
Load "dbe" # Double-Buffering Extension
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
Load "glx" # 3D layer
EndSection

Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbCompat" ""
Option "XkbOptions" ""
EndSection

Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/usbmouse"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
Identifier "Mouse2"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons"
Option "Emulate3Timeout" "50"
EndSection

Section "Monitor"
Identifier "TV"
VendorName "sanyo"
ModelName "Basic"
HorizSync 30-50
VertRefresh 60
EndSection

Section "Monitor"
Identifier "monitor1"
VendorName "NEC"
ModelName "NEC MultiSync 5D"
HorizSync 30.0-66.0
VertRefresh 50.0-90.0

# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync

# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630

# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection

Section "Device"
Identifier "device1"
VendorName "nVidia Corporation"
BoardName "NVIDIA GeForce4 (generic)"
Driver "nvidia"
Screen 0
BusID "PCI:3:0:0"
Option "DPMS" "0"

# sample twinview setup
# Option "TwinView"
# be sure to replace the HorizSync and VertRefresh with correct values
# for your monitor!
# Option "SecondMonitorHorizSync" "30-50"
# Option "SecondMonitorVertRefresh" "60"
# Option "TwinViewOrientation" "clone"
# Option "MetaModes" "1024x768,1024x768; 800x600"
# Option "ConnectedMonitor" "CRT,TV"
# Option "TVStandard" "PAL-N"
# Option "TVOutFormat" "SVIDEO"
# Option "TVOverScan" "0.7"
Option "NvAGP" "1"
EndSection

Section "Device"
Identifier "device2"
VendorName "nVidia Corporation TV"
BoardName "NVIDIA GeForce4 (generic)"
Driver "nvidia"
Screen 1
BusID "PCI:3:0:0"
EndSection

Section "Screen"
Identifier "screen2"
Device "device2"
Monitor "TV"
DefaultColorDepth 24

Subsection "Display"
Depth 24
Modes "1024x768"
EndSubsection
Option "TVStandard" "PAL-N"
Option "ConnectedMonitor" "TV"
Option "TVOverScan" "0.7"
Option "TVOutFormat" "SVIDEO"
EndSection

Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultColorDepth 24

Subsection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubsection

Subsection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubsection

Subsection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubsection

Subsection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubsection
EndSection

Section "ServerLayout"
Identifier "layout1"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
InputDevice "Mouse2" "SendCoreEvents"

# Screen "screen1"
Screen 0 "screen1"
Screen 1 "screen2" RightOf "screen1"
# Screen 1 "screen2" RightOf "screen1"
EndSection

--------------

I've had some problems with 4496 driver with TV out (see http://www.nvnews.net/vbulletin/show...5&pagenumber=1).
So I'm using the 4363 version which works fine with me (except video overlay is only on screen 0 - hoping that Nvidia would allow us soon to select which screen for that :D - I have a little hack for that using nv-tv-out with the NVIDIA TV encoder chip using this xfree configuration that I can explain if anybody cares).


All times are GMT -5. The time now is 05:40 PM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.