nV News Forums

 
 

nV News Forums (http://www.nvnews.net/vbulletin/index.php)
-   NVIDIA Linux (http://www.nvnews.net/vbulletin/forumdisplay.php?f=14)
-   -   TwinView trouble (http://www.nvnews.net/vbulletin/showthread.php?t=17416)

pilpi 09-03-03 06:48 AM

TwinView trouble
 
A couple of screenshots:
http://milk.ton.tut.fi/~pilpi/nvidia/

I've got the 4496 of the nVidia driver installed on my SuSE 9 box. Tux Racer runs fine ;), but when I try to set up TwinView to my TV (with SaX2 - I tried earlier to go to XF86Config myself but that was a disaster), I get the error message shown in the second screen shot:

(WW) NVIDIA: No matching Device section for instance (BusID PCI:1:0:0) found
(EE)Screen 0 deleted because of no matching config section.

I never was quite sure about what to select for BusID. If I select ScreenID 0 I don't get an error message nor an image on my TV. On W2K TwinView works fine.

Any help or attempt to help will be appreciated =)

pilpi 09-03-03 10:20 AM

Twinview trouble II
 
1 Attachment(s)
Some of the information requested in the posting instructions:

According to SaX2, the graphics card is NVidia GeForce4 MX 440.

Undex /proc/driver, there is no /nvidia/cards/0 while X is running

Processor: AMD 1600+, 512 MD RAM

attached: XF86Config

eliu 09-03-03 10:35 AM

Modify /etc/X11/XF86Config-4, you must substitute 1024x768 with 1280x1024 if your resolution is 1280x1024.

Section "Device"
Identifier "device1"
VendorName "nVidia Corporation"
BoardName "NVIDIA GeForce2 DDR (generic)"
Driver "nvidia"
Option "DPMS"
Option "TwinView" "True"
Option "TwinViewOrientation" "Clone"
Option "TVStandard" "NTSC-M"
Option "MetaModes" "1024x768,640x480; 640x480,640x480"
EndSection

Note that if you use (Mandrake 9.1 XFree4.3). You cannot switch to 640x480 by pressing control-alt-+.
It's a bug in XFree86 4.3

pilpi 09-03-03 11:00 AM

Thanks (=.

So this is your configuration? It's muchly the same as mine, so do you have an idea about what's wrong with mine? Is the generic driver better somehow? I wouldn't like to risk hand-editing XF86Config unless sure.

BTW, what is that DPMS option, didn't see it in the nvidia documentation.

eliu 09-03-03 08:49 PM

problem 1: missing quote
Option "ConnectedMonitor" "CRT

problem 2: tvstandard is not defined
Option "TVStandard" "NTSC-M"

pilpi 09-04-03 04:05 AM

Thanks! (=

It works.

I guess I'm going to let that SaX2 just lie in its own stools.


All times are GMT -5. The time now is 05:29 AM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.