nV News Forums

 
 

nV News Forums (http://www.nvnews.net/vbulletin/index.php)
-   CPUs, Motherboards And Memory (http://www.nvnews.net/vbulletin/forumdisplay.php?f=3)
-   -   What is the stock VTT for 3930K? (http://www.nvnews.net/vbulletin/showthread.php?t=175510)

Kain 03-04-12 11:05 AM

What is the stock VTT for 3930K?
 
What is the default VTT for a stock clocked 3930K? Is it 1.05 volts? When I enabled my XMP profile for my RAM, DRAM voltage was set at 1.5 volts and VTT at 1.2 volts. However, the VTT was not in effect and was at the default 1.05 volts. Every few weeks I would get a BSOD and also some monitor distortion problems. I upped the VTT to 1.1 volts but still got some monitor distortion. I then upped it to 1.15 volts and will see how things are.

My question is, since XMP stated the VTT should be at 1.2 volts, should I just enter 1.2 volts or leave it at 1.15 and see how things are?

All things aside, is the default suppose to be 1.05 for a stock clocked 3930K? If so, why did XMP try to enter 1.2 volts for VTT?

mullet 03-04-12 05:15 PM

Re: What is the stock VTT for 3930K?
 
Yes, I believe the stock VTT is 1.05v. I'd set it to 1.2v is see if your problem disappears. 1.2v is more than safe to use.

Kain 03-05-12 10:13 AM

Re: What is the stock VTT for 3930K?
 
Ah, I guess you're the one who posted in my Overclock.net forum post. :p

I've seen overclocked systems running 1.2 volts so I was wondering if I could get away with less. Running 1.15 volts right now. Is it normal for a stock clocked 3930K to run 1.2 volts on VTT? I've seen overclocked systems running that much. If my BSOD or monitor distortion occurs again, I'll up it to 1.2 volts. Can lack of VTT cause monitor distortion?


All times are GMT -5. The time now is 09:38 PM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1998 - 2014, nV News.