The New Nvidia GeForce GTX 680 (Kepler) Finally Making an Appearance
Nvidia has just officially announced their new flagship GPU, the GeForce GTX 680 based on the new Kepler architecture and manufactured using 28nm process. The video cards based on the new graphics processors offer increased performance over the previous generation of Fermi and the flagship GTX 580 as well as numerous improvements and new features. Below I've prepared a short list of thee specifications of the new GTX 680 GPU as compared to the previous GTX 580 single GPU flagship from Nvidia, so you can easily compare what has changed.
Nvidia GeForce GTX 680 Specifications:
Graphics Card: GeForce GTX 680 2GB* The superscript numbers in green and red show the change as compared to the specs of GTX 580.
I don't want to go too much into detail about changes in the new Kepler architecture, as I'm sure not a lot of people are actually interested too much into such technical details. I just want to mention a few things and then will go to the more interesting part, namely the new features that the GTX 680 offers over the previous generation. There has been a significant change in the basic modules that build-up the GPU in the Kepler and as a result you get more CUDA cores and there is no more a separate shader clock available, there is just one clock frequency for the GPU, although there are changes in how it functions as well. And while the number of CUDA cores has been essentially tripled you should not expect to get three times the performance of a GTX 580 with a single GTX 680, as there are other important things that are responsible for the overall performance that a video card can provideā?¦ there are the Texture and ROP units as well, and then there is the memory frequency and bandwidth. Looking at the specs of the new GTX 680 you may notice that the operating frequency of the memory chips has been increased significantly, but the width of the memory bus has been reduced, so essentially the memory bandwidth remains pretty much the same as it was with the GTX 580. So instead of tripling the performance you should expect something more like 1.5x up to 2x the performance of the previous generations of GPU, depending on the usage scenario of course, although that would require some extra testing to confirm, especially when using in stereo 3D mode.
And now a it for some of the new features. One interesting thing is the GPU Boost functionality that is supposed to control in real time the operating frequency of your graphics processor, so that it can maximize the performance you get whenever you need it. Automatically increasing the working frequency of the GPU when a certain application is not optimally loading the graphics card, so you can squeeze some more performance. And since the GPU Boost cannot be disabled by the user, it will ultimately change the way you overclock the video card, especially considering that there are no more two different frequencies for the GPU anymore. And while you cannot disable the GPU Boost, you can control how it works, making you get the most out of your video card in terms of performance even when you overclock it. But thanks to the GPU Boost function and the extra electronics used to monitor the current utilization, temperature and power consumption of the GTX 680 you also get some neat new extras such as the ability to limit the maximum framerate in a 3D application to lets say 60 or 120Hz. So you can look at the GPU Boost as not only something that can help you get the most out of your GPU, but also a function that can help you save power and resources when you actually don't need them. Because when you limit the maximum framerate there is usually no need for the video card to use all of its processing power to maintain that framerate and thus it will run cooler and more silent.
Another new thing is the improvement in the Anti-Aliasing modes that you get at your disposal in order to get rid of the jaggies and get smoother looking image in games. Aside from the FXAA mode that is also supported, the new GTX 680s introduce the two new TXAA modes that bring better quality AA than MSAA with less performance hit. Another interesting new feature is the Adaptive VSync that can help you smooth out the transitions when the framerate drops below a certain level, something that with no VSync or with normal VSync usually leads to tearing of the image. And while Adaptive VSync may not be able to completely eliminate the tearing when framerate drops significantly it can help reduce it greatly making it not so apparent and even hardly noticeable if you are not paying special attention in most of the cases. So another good thing if you are a gamer and going for GTX 680 if you are not a gamer may seem like something a bit pointless to do.
And here comes another very interesting new feature ' the Single GPU 3D Vision Surround. Since the GeForce GTX 680 is now capable of driving four independent monitors at the same time you are now able to create a 3D Vision Surround with just a single video card, no more need of at least two GPUs in SLI to drive the 3D Vision Surround. Have in mind though that the GTX 680 has Dual-Link DVI-I, Dual-Link DVI-D, DisplayPort 1.2 a HDMI 1.4 High Speed interfaces. Obviously you can't use the HDMI 1.4 HS interface for a 3D Vision Surround setup, so the third display needs to be connected either through the DisplayPort or with a DP to DL-DVI adapter. The HDMI 1.4 High Speed interface should be capable of providing more than the 1080p 24Hz 3D mode that the normal HDMI 1.4 interface currently supports, however you would also require a 3D monitor supporting it and there are still no such consumer products available apparently. There are also some improvements in the Surround support, for example you can use a fourth accessory display together with the surround for showing your email for example or something else while playing, although switching to that monitor can be a bit tricky. Also you finally get the taskbar displayed only on the center display when using a Surround setup, and the ability to maximize windows only in a single display and not on all three (user selectable) and these are apart of software improvements actually, so you should be getting them available on older hardware as well. There is also a new Bezel Peek function to allow you to briefly see in-game menus or objects that may appear hidden due to the use of bezel correction by using a hotkey, there is also faster display acceleration when using only a single display in a surround setup as well as an improvement in the list of resolutions you get active when using a Surround setup, so you will not be bothered by a huge list resolutions that you need to go through. One thing that I've almost missed is the DirectX 11.1 support, but should you actually care that it is supported by the hardware, not really at the moment as it is nothing major for now.
The new GeForce GTX 680 from Nvidia is definitely a good improvement not only in terms of performance, but also in terms of new features that can help you get the most out of your gaming experience, including in stereoscopic 3D mode as well. It is more powerful and more energy efficient as compared to the previous generation and brings some new useful features that are surely going to be interesting for gamers. The new GeForce GTX 680 should be available with a price of about $499 USD already and I hope to be able to soon get the card to test and provide you with some benchmarks of the 680 in stereoscopic 3D mode, so stay tuned for more about thatā?¦
Related posts you might be interested in:
|All times are GMT -5. The time now is 04:47 PM.|
Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2014, nV News.