Suse 8.2 and Black screen
Hi guys, I am really having trouble getting the Nvidia drivers to work in Suse
8.2 with 3d enabled.
I am using a MSI motherboard MS-6738 which does have an on board graphics card
but its disabled when a graphics card is plugged into the Agp slot. There is
no option in the bios to manually turn the on board gfx card off.
I have a Geforce 2 mx400 plugged into the agp slot.
I have tried ver 4349, 4363 and 4496 but they all do the same thing. When ever
I try to start X after enabling 3d i get a black screen and cant see or do
I am able to telnet into my Suse 8.2 box and kill X. If I then run the
switch2nv script i can then start X with no problems but as soon as I try
switch2nvidia the same thing happens again. Black screen with no response
except via telnet.
While i was connected to the Suse8.2 box via telnet I grabbed this error
message from /var/log/messages
Sep 24 11:30:01 linux kernel: 0: nvidia: loading NVIDIA Linux x86 nvidia.o
l Module 1.0-4349 Thu Mar 27 19:00:02 PST 2003
Sep 24 11:30:01 linux insmod: Warning: loading
rnel/drivers/video/nvidia.o will taint the kernel: non-GPL license - NVIDIA
Sep 24 11:30:01 linux insmod: See http://www.tux.org/lkml/#export-tainted
information about tainted modules
Sep 24 11:30:01 linux insmod: Module nvidia loaded, with warnings
Sep 24 11:30:03 linux kernel: Linux agpgart interface v0.99 (c) Jeff Hartmann
Sep 24 11:30:03 linux kernel: agpgart: Maximum main memory to use for agp
Sep 24 11:30:03 linux kernel: agpgart: Trying generic Via routines for device
Sep 24 11:30:03 linux kernel: agpgart: AGP aperture is 128M @ 0xd0000000
The second last line has me intrigued. Would that be the drivers trying to
drive the onboard gfx card by mistake? or am I barking up the wrong tree here
Btw the same hardware with Suse 8.0 and Nvidia drivers 3123 work fine with 3d
Any ideas anyone?
Cheers , Glenn
i got a workaround to the (BSOD) BlankScreenOfDeath problem with a similar setup as yours (ie suse 8.2 and gf4 mx 440 gpu)
post on the thread if this works for you
Well I did have "some" success with your suggestions, however I have now got 3d to work fine by turning off "acpi" in the bios.
3d now works fine. weird stuff.
Thanks for the tips.
|All times are GMT -5. The time now is 10:01 PM.|
Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2014, nV News.